PTFE hose, smooth, 1 braiding Properties Application area Medium pressure applications with hydraulic fluids (high temperatures) and aggressive media for the chemical industry Surface technology 2-component systems Design Smooth inliner in white PTFE Inner layer PTFE (polytetrafluoroethylene) Outer layer none Colour metallic Material PTFE (polytetrafluoroethylene) Note The pressure values listed apply to hoses only. Not recommended for high dynamic pressure loads. From 120 °C the pressure reduction factor is to be taken into account. (Max. operating pressure = operating pressure x factor). Temp.: 120 °C / 140 °C / 160 °C / 180 °C / 200 °C / 220 °C Factor: 1,00 / 0,80 / 0,60 / 0,40 / 0,20 / 0,00 The tubular fabric has a safety factor (SF) 3 against bursting Item Identification DN* Size Inches Internal 0 Internal 0 External External Operating Test Burst Min. Weight min. max. 0 min. 0 max. pressure pressure pressure bending per m radius (mm) (mm) (mm) (mm) (bar) (bar) (bar) (mm) (kg) DN = Nominal diameter, nominal width Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability. 27.63.2619 HANSA-FLEX AG www.hansa-flex.com 1