HANSA^ FLEX HD 100 T (1SN)HD hose, high thermal resistance Properties Application area Low and medium pressure circuits with extreme temperatures (e.g. foundries, compressors) Hydraulics in mechanical engineering Special features outstanding ozone, weather, UV and temperature resistance Inner layer oil resistant synthetic rubber Insert one high tensile steel wire braided insert Outer layer synthetic rubber with high temperature, ozone and weather resistance Colour blue Media Mineral oil Gear oil Glycol and polyglycol Air-oil vapour Water-oil emulsion (0°C to +100°C) _Water (0°C to + 70°C)_ Temp. min. °C -55 Note The change in length of the hose is determined at max. working pressure during testing to EN ISO 1402. Operation with compressed air requires a perforated outer cover. Item Identification DN* Size Inches Internal 0 Internal 0 0 Insert 0 Insert External Operating Test Burst Min. min. max. min. max. 0 max. pressure pressure pressure bending radius (mm) (mm) (mm) (mm) (mm) (bar) (bar) (bar) (mm) DN = Nominal diameter, nominal width Despite careful checking, we cannot guarantee the accuracy of all information included on this site, and we accept no liability. 19.03.2019 HANSA-FLEX AG www.hansa-flex.com 1