Point-Setting Systems Trend-Setting Technology

1 | Electric Point Machines 1.1 Point Machines 61.1 series Page 5 1.2 Point Machines 61.1-Metro series Page 5 1.3 Point Machines 500 series Page 6 1.4 Point Machines 715 series Page 6 2 | Manual Point Machines 2.1 Point Machines 40 series Page 7 2.2 Point Machines 42 series Page 8 2.3 Point Machines 500 series Page 8 2.4 Point Machines 160 series Page 9 2.5 Point Machines 180 series Page 9 3.1 People mover point machines Page 10 3.2 Switch & Control Page 10 3.3 Point Machines for frogs and wing rails, sequence and multi-tongue points Page 11 3.4 Point Machines of the Solar series Page 11 3.5...

The technical superiority of the equipment and systems supplied by HANNING & KAHL stems from almost a century of experience: the company started producing components for rail-based public transport in 1928, and the core competence has been consolidated continuously ever since. HANNING & KAHL point-setting systems set technical standards and are deployed successfully all over the world. Our partners are operators of tram, underground and light rail services, secondary lines, industrial railways and factory sidings as well as point manufacturers, all of whom are committed to uncompromised safety....

1 | Electric Point Machines Trend-Setting Technology Safety, functionality and economic efficiency – these are the distinguishung characteristics of HANNING & KAHL point machines. With modular structure, these point machines are unsurpassed in their versatility. For deployment on depots and rail networks, HANNING & KAHL offers point machines which are extremely economically efficient on account of their long service life and minimum maintenance requirement. We also offer electric point machines for flat-bottom rail deployment which are suitable for the harsh everyday conditions in shunting operations...

The modular point machine of the 61.1 series can be deployed for all transport authority requirements. Positive locking of the drive rods and an independent detector lock device fulfil SIL 4 in compliance with CENELEC EN 50129 specifications. It is supplied with four-wire activation for deployment in electrical locally-set points (EOW) or electronic interlocking controllers in mainline technology. Attributes of the 61.1 series: - Redundant locking concept - Protection class IP67 in compliance with EN 60529 - For use in line networks, on bridges and in tunnels - Drives and detector rod connection...

Point machines of the 500 series from HANNING & KAHL are a pragmatic and cost-effective solution for depots and stabling areas for light rail vehicles and trams. Points are optimally equipped with this compact point machine. With the 500 series, grooved rail points can be operated either electro-hydraulically or electro-magnetically. The point machine is installed in space-saving manner in the middle of the track; it can also be installed on the side. Attributes of the electric 500 series: - Protection class IP67 in compliance with EN 60529 - Compact design in sub-assembly structure - Corrosion...

At many locations in the line network - e.g. for trailed or faced points which are seldom set - the manual setting mechanism is the most economical solution. The optimal cost-benefit ratio of HANNING & KAHL manual setting mechanisms will convince you. The HANNING & KAHL manual point machine for installation in flat-bottom points are extremely flexible. Installation is possible at the side or in the centre of the tracks. As with all HANNING & KAHL manual setting mechanisms, throw-over and spring-back function are possible at all times without replacing components. Manual setting per hand lever...

HANNING & KAHL has driven forward the technological development for trailed points and also for faced points which are seldom re-set. Manual point machines in innovative, reliable design with particularly low installation height. Attributes of the 42 series: - Very low installation height of just 180 mm - Spring-back or throwover function? Simply set with the same components on site - For most point types, gauges and point openings up to 60 mm - Manual setting with low force requirement with just one stroke - Progressively adjustable spring force for securing point tongues in end positions -...

The manual point machines for installation in flat-bottom and deep-bed points offer flexible deployment possibilities. Installation is possible beside or between the tracks. As with all manual point machines supplied by HANNING & KAHL, throw-over and spring-back function are possible at all times without replacing components. The point can be set manually with just one stroke of a setting lever. - Suitable for different point types, point openings and gauges, - Redundant, progressively adjustable spring force for safe position of point tongues, - End-position damping for noise reduction For points...

3 | Further Applications Trend-Setting Technology Exporting expertise Unconventional tasks call for extraordinary expertise and commitment. At HANNING & KAHL, we welcome challenges. In teamwork with customers we put innovative solutions into practice. The experience and innovative strength of HANNING & KAHL are appreciated all over the world, including Asia and the USA, where sophisticated projects are often realised. 3.1 People mover point machines People movers are driverless transport systems. Trains drive on rubber tyres and are guided by a rail in the centre of the trackway or they use the...

Further Applications | 3 Trend-Setting Technology 3.3 Point Machines for frogs and wing rails, sequence and multi-tongue points Increasing networking of tram and light rail vehicles bring new requirements for line management. Today, tram and light rail vehicles drive on tracks which combine 1,000 mm and 1,435 mm gauges. The solutions are special points with HANNING & KAHL point-setting systems, e.g. frog and wing-rail points. Here, the movable point parts are set by HANNING & KAHL technology, secured in their end positions and checked. Further special applications include sequence or multi-tongue...