*mydirectindustry

Catalogs
Hannibal Power and Technology
Modular Inverter INV SERIES 48VDC-220VAC

Modular Inverter INV SERIES 48VDC-220VAC

Product catalog summary

Overview: The Hannibal Modular Inverter is designed to convert DC power (24Vdc, 48Vdc, 110Vdc, and 220VDC) into 220Vac 50Hz sinusoidal AC power. It features complete isolation between input and output, supports hot plugging, and allows for parallel connection redundancy. This product is ideal for users requiring high reliability and maintainability in power supply systems.

Key Features:

High-frequency commutated modules using IGBT technology.
Modules are cooled by forced ventilation.
Available in 19” rack and cabinet mount configurations.
Redundant module operation capability.
Includes a room temperature probe.
Equipped with LVD (Battery Low Voltage Disconnect) and output breakers for loads.
Audible and LED alarms for fault indication.
User-friendly HMI for parameter adjustments and calibrations.

General Specifications:

Digital control using 32-bit DSP and high-frequency SPWM technology.
N+1 redundancy design for parallel connection redundancy.
Independent control of each module without master/slave configuration.
Modular hot-pluggable design for easy installation and operation.
Built-in bypass with user-selectable inverter or bypass priority.
Monitoring management with sound and light alarms for faults.
Protection against input/output overvoltage and undervoltage.

Technical Datasheet:

Models: HPT48/220-3KVA and HPT48/220-6KVA.
Input: AC voltage 220Vac (single phase), battery input voltage 48Vdc, battery voltage range 42-58Vdc.
Output: Capacity 3KVA/6KVA, rated output capacity 2.4KW/4.8KW, voltage 220VAC±5%, efficiency 97% (bypass mode), >90% (inverter mode).
Output frequency: 50Hz±0.2Hz, pure sine wave, THD 3% (line load).
Switch time: 10ms (bypass to inverter mode).

Protective Features:

AC under/over voltage switch protection.
Over-temperature and battery voltage protection.
Output overcurrent protection with specific load current thresholds.

Safety and EMC:

Dielectric strength: AC-Chassis 3500Vdc, DC-Chassis 750Vdc.
Compliance with LVD EN 60950-1, EN62368-1, EMC/EMI EN 61000 series, and ROHS IEC62321 series.

Environmental Test Performance:

Operating ambient temperature range: -5°C to +50°C.
High temperature operation at 45±2°C for 24 hours under rated load.

Catalog excerpts

Modular Inverter INV SERIES 48VDC-220VAC-1

Modular Inverter INV SERIES 48VDC-220VAC Modular Inverter systems Hannibal Modular Inverter is an Inversion Device that Converts 24Vdc, 48Vdc, 110Vdc, and 220VDC Power Supplied by Communication DC Power Supply into 220Vac 50Hz Sinusoidal AC Power. It is Designed with Complete Isolation of Input and output And Allows hot Plugging and Parallel Connection redundancy. With a Small Size and Convenient Parallel Connection. It is a Product Specially Designed for Users with High Requirements for power Supply reliability and maintainability.

Open the catalog to page 1

Modular Inverter INV SERIES 48VDC-220VAC-2

Use 32-bit DSP Digital and high-frequency SPWM Technology It Can Form an N+1 Parallel Connection redundancy power supply system • PARALLEL CONNECTION TECH WITHOUT MASTER/SLAVE Operation and Parallel Connection of Each module are independently controlled by the built-in DSP • MODULAR HOT-PLUGGABLE It Allows "Plug-And Play "without Any Parameter Setting or operation • BUILT-IN BYPASS User May choose inverter priority or bypass Priority. • MONITORING MANAGEMENT The Indicator Lamp Panel Can give Out Sound and Light Alarm upon Fault It has Protection against input Over voltage /Under Voltage, output...

Open the catalog to page 2

All Hannibal Power and Technology catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list