Welding Reels
12Pages

{{requestButtons}}

Catalog excerpts

Welding Reels - 1

Welding Reels | Mobile and Fixed Installations | Arc Welding | Gas Welding | Cutting Operations | You Can’t Buy A Better Reel. Family owned and operated since 1933

Open the catalog to page 1
Welding Reels - 2

WELDING REELS Reel Type Page Welding Hose & Cable Specifications 10 Hannay Reels Spec Worksheet 11 Only one reel bonds quality and value. When it comes to safety and efficiency, you can count on Hannay Reels. Used worldwide, our durable, dependable reels help your operation run smoothly - and reduce workplace accidents - by keeping hoses and cables organized and off the floor. We offer the widest variety of arc and gas welding reels in the industry. Our high quality reels are built to last and engineered specifically for welding - never retrofitted to the job - so you can expect unsurpassed...

Open the catalog to page 2
Welding Reels - 3

To handle #2 through 4/0 cable to 400 amps. • For use with single-conductor electrode cable or for grounding lead. • 400-amp rotary electrical device. • Rugged portable reel with carrying handle. • Instant use with any cable length unwound. • Quick connection to your welder. • Manual rewind (permanently attached knob). • Adjustable friction brake. WCR11-17-19 Cable Capacity of Reel feet m Model Number Notes: 1. Specifications subject to change. 2. Be sure to check dimensions and weights prior to ordering. 3. For welding hose and cable specifications see page 10. 4. Finish: Refer to Ordering...

Open the catalog to page 3
Welding Reels - 4

Series SWCR/WCR • Spring, Power or Manual Rewind • Arc Welding H To handle #2 through 4/0 cable to 400 amps. • or use with single-conductor electrode cable or grounding lead. F • 400-amp rated rotary electrical device. • Instant use with any cable length unwound. • Quick connection to your welder. • Easy access and greaseable zerk fitting. SWCR • on-sparking ratchet assembly. N • eclutching arbor is provided to prevent damage D from reverse winding. • A cable stop should be used. • our-way roller assembly. Roller position must be specified. F WCR Series SWCR Shown with optional cable and...

Open the catalog to page 4
Welding Reels - 5

Series SWCR/WCR• Spring, Power or Manual Rewind • Arc Welding Std. Roller Assy. Reel Dimensions*** in. mm B D E F F Notes: 1. Specifications subject to change. 2. Upon request, reels can be supplied with drum lengths other than shown and with disc sizes in other diameters. 3. Weights shown in chart are for crank or spring rewind models. ADD these amounts for power rewind models (Series WCR): Net Ibs/kg Ship Ibs/kg 4. When ordering power rewind Series WCR, prefix model number with: A = Air Rewind EP = Electric Rewind HD = Hydraulic Rewind (Air rewind reels are supplied with control valve and...

Open the catalog to page 5
Welding Reels - 6

Protective Ground Lug Boot Part No. 9955.0202 Standard on reel To handle #1 through 4/0 cable to 400 amps. • Designed to handle both grounding and arc welding leads on the same reel unit. • Two independent spools to hold separate lengths of welding cable. • 400-amp rotary electrical device for instant and constant use. • Instant use with any cable length unwound. • Gear-driven crank rewind with a removable handle. • Dual pinion brakes. • Rollers and roller mounting brackets are accessory items. Specify roller position. PARTS DRAWING - ISO 185 Model Number Cable Capacity of Reel feet m Gauge...

Open the catalog to page 6
Welding Reels - 7

To handle twin 1/4” or 3/8” I.D. welding hose. • Heavy-duty spring motor. • Non-sparking ratchet assembly. • Declutching arbor to prevent damage from reverse winding. • Standard inlets: 90° ball bearing swivel joints, 1/2" female NPT threads. Oxy/acet brass inlet adapters are available. • Standard outlets: male 9/16"-18 threads, right-hand for oxygen, left-hand for gas. • Pressures to 300 psi (21 bar). • Temperatures from -40°F to +200°F (-40°C to +93°C). • Type of gas used must be specified. • 4-way roller assembly. Roller position must be specified. • Hose stop is required. Optional hose...

Open the catalog to page 7
Welding Reels - 8

Standard configuration Standard configuration shown with MX rewind shown with air rewind To handle twin 1/4” through 3/8” welding hose. • MX chain-driven crank rewind or powered by a compressed air or hydraulic motor. • MX rewind reels supplied with a pinion brake. • Power reels not supplied with a brake. • Standard inlets: 90° ball bearing swivel joints with 1/2" female NPT threads. Oxy/acet brass inlet adapters are available. • Standard outlets are male 9/16"-18 threads. Right-hand for oxygen, left-hand for gas. • Pressures to 300 psi (21bar). • Temperatures from -40°F to +200°F (-40°C to...

Open the catalog to page 8
Welding Reels - 9

To handle twin 1/4” through 3/8” I.D. hose. • Gear-driven crank rewind with pinion brake. • Standard inlets: 90° ball bearing swivel joints 1/2" female NPT threads. Oxy/acet brass inlet adapters are available. • Standard outlets are male 9/16"-18 threads. Right-hand for oxygen, left-hand for gas. • Pressures to 300 psi (21 bar). • Temperatures from -40°F to +200°F (-40°C to +93°C). • Type of gas used must be specified. Standard gear-driven crank rewind. Optional external mounting brackets Part No. 9906.0025. Add 2-1/2" to the X dimensions shown in the chart. Model Number 1. Specifications...

Open the catalog to page 9
Welding Reels - 10

WELDING REELS Welding Hose Our oxygen/acetylene grade R hose assemblies with inside diameters of 1/4" and 3/8" have working pressures of 200 psi (14 bar), working temperatures of -40°F to +200°F (-40°C to +93°C), and have an EPDM core and cover with one textile braid reinforcement. This hose is designed for oxygen/acetylene only. Grade T oxygen/acetylene, propane, or M.A.P.P. hose is also available. For hose assembly details and pricing, consult your Hannay dealer or factory. WELDING AND GROUNDING CABLE N Series Reels 7/16" wide x 7/8" long slot running front to back Pressed Frame Reels and...

Open the catalog to page 10
Welding Reels - 11

Hannay Reels Spec Worksheet To specify Hannay reels, fill out this simple form and mail, fax or email it to your dealer. Photocopy this page or download and print from hannay.com 1. Who is the reel for? Contact Date / / Company Position Street Address City State Zip Country 2. What is the reel for? ■ HOSE (check one): 0 Storage only 0 Live Single hose 0 Live Dual hose Indicate your custom specifications Inside diameter: Hose length: Bend radius: Flat hose dimensions: Outside diameter: Hose weight: Coupling spacing: Type of product handled live application: (check one): O Liquid (specify): O...

Open the catalog to page 11

All HANNAY REELS catalogs and technical brochures

  1. Hose Reels

    36 Pages

  2. Aviation Reels

    20 Pages

  3. Rescue Reels

    21 Pages