Products for the Analysis of Drinking Water

HANNA is Dedicated to the testing and monitoring of drinking water, our most precious resource. Contents Turbidity and Chlorine . .4-9, 24-25, 27 Single Parameter Photometers . . .26-28

Water sector professionals choose as part of their drinking water monitoring strategy because of our performance, quality and value.

Instruments built to comply with EPA accepted test methods for reporting Turbidity and Chlorine Turbidity and Chlorine Meters • HI 83414 features 4 ranges: Ratio Turbidity; Non-Ratio Turbidity; Free Chlorine; Total Chlorine • HI 88703 features 2 ranges: Ratio Turbidity; Non-Ratio Turbidity • Meets USEPA requirements • CAL CHECK™ for HI 83414 • 2, 3, 4 or 5 point turbidity calibration • Backlit LCD • On-screen tutorial modes • Log and recall up to 200 measurements • Contextual help menus • Auto shut-off • Automatic range selection • Good Laboratory Practice capabilities • Features USB PC connection...

Rilio turt-jdKv Built in complete GLP information, <nslrum*fil ifiJ prcst ftttl HISMtt - Turbidity end Free I' Flrfis Turbidity Calibration Error Messages Free (Worme Help Mode Both meters offer interactive contextual help to assist users during measurements, Tutorial Mode Provides additional information to help users during measurements. CAL CHECK™ allows users to check instrument calibration against a NIST traceable standard before making a set of measurements. With the same standard, the instrument could be re- Turbidity in Potable Waters Turbidity is one of the most important parameters used...

Instruments built to comply with USEPA accepted methodology for reporting Turbidity and Chlorine Turbidity and Chlorine Meters Turbidity and Free/Total Chlorine Meters The HI 93414 measures two of the most important parameters of drinking water: turbidity and free and total chlorine while the HI 98703 measures turbidity only. Both meters are EPA compliant and feature 3 turbidity measurement ranges: 0.00 to 9.99 NTU, 10.0 to 99.9 NTU, and 100 to 1000 NTU. Reliable performance of the HI 93414 is validated using HANNA's exclusive CAL CHECK™ system and ready-made, NIST traceable chlorine standards....

• Tungsten light source—EPA compliant turbidity measurement • High accuracy at low ranges • Exclusive chlorine CAL CHECK™ calibration validation (HI 93414 only) • Log up to 200 readings • User replaceable light source • 2, 3 or 4 point turbidity calibration • USB and RS232 PC connectivity • Backlit LCD • GLP capability • User friendly display with guidance codes • Auto shut-off • Battery percentage on display • Continuous current time on display A Revolution in Organized Data Management Fast Tracker™ Tag Identification System (T.I.S.) HANNA’s exclusive Fast Tracker™ — Tag Identification System...

Turbidity Testing Water clarity is paramount when producing water for human consumption. Turbidity, an optical property, is a measure of the cloudiness of water. Turbidity causes light to be scattered and absorbed rather than transmitted. The measurement of turbidity is used to indicate water quality and filtration effectiveness. Increases in suspended and colloidal matter increase turbidity. These levels are often associated with higher levels of disease-causing microorganisms such as viruses, parasites and some bacteria that can cause symptoms such as nausea, cramps, diarrhea, and associated...

The HI 88713 is a high accuracy meter designed for low turbidity. This instrument exceeds the requirements of ISO 7027 standard The HI 98713 ISO Portable Turbidity meter meets and exceeds the requirements of the ISO 7027 for water quality. • Normal, average and continuous measuring modes Range NTU Ratio Mode Range Selection Resolution NTU Ratio Mode 0.01 FTU from 0.00 to 9.99 FTU 0.1 FTU from 10.0 to 99.9 FTU 1 FTU from 100 to 1000 FTU Accuracy NTU Ratio Mode NTU Non-Ratio Mode Repeatability Stray Light Light Detector / Light Source Method Turbidity Standards ±2% of reading plus stray light /...

Simultaneous Dual Graph Display Research Grade pH, ISE and ORP Meter Tailored to your Application HANNA’s new research grade laboratory pH/mV/ISE benchtop meter features a 240 x 320 dot-matrix color display with on-screen help, dual-channels, simultaneous graphing, language selection and custom configuration. • Exclusive Calibration Check™ for pH • 240 x 320 color display • Simultaneous dual graph display and real-time logging • USB and RS232 for computer compatibility • Multi-language interface • Logging, graphing and GLP capabilities • Manual or automatic temperature compensation • Relative...

Extend your Parameter Measurement with Ion Selective Electrodes Chloride (Titration) * Fluoride (Direct) * Nitrate (Direct) * Chloride is a common non-toxic material present in small amounts in drinking water and produces a detectable salty taste at the aesthetic objective level of 250 mg/L (limit referred to the EPA MCL (maximum contaminant level). Measured levels are normally under 20 mg/L (ppm). The EPA’s National secondary drinking water standard for chloride is set at 250 mg/L (ppm). Fluoride is a water additive which promotes strong teeth. Many public water systems add low levels of fluoride...

Backlit Multi-level Display Calibration Check™ pH Meter • Exclusive Calibration Check™ • Electrode condition monitoring • Backlit, multi-level LCD with on-screen guide • Up to 7 standard and 2 custom calibration buffers • User-selectable calibration timeout reminder • Measures in °C or °F • Waterproof • Rechargeable batteries • BEPS (Battery Error Prevention System) Accurate and Versatile The HI 9126 is ideal for on-site spot checks. It’s sleek, portable casing and large LCD with backlight works with the operator to achieve fast and accurate results in a variety of testing locations, such as...