Edge bench Conductivity meter
8Pages

pH • Resolution selectable from 0.01 and 0.001 pH • Range -2.000 to 16.000 pH • Accuracy ± 0.002 pH • Data logging – Manual log on demand – Manual log on stability – Interval logging • Temperature readout (°C or °F) • Automatic Temperature Compensation • CAL-CHECK® Indicators: – Probe condition – Response time – Check buffer – Clean electrode • Sensor Check Indicators: – Broken electrode – Clogged junction • GLP data – Records date, time, offset, slope and buffers used during calibration • 5 point calibration – A choice of 7 pre-programmed buffers plus 2 selectable custom buffers •...

Conductivity • Four ring potentiometric probe – Covers all ranges from 0.00 μS/cm to 500 mS/cm (absolute EC) Dissolved Oxygen • Clark type polarographic probe with replacement membrane cap • Ranges: – ± 1% of the reading ± (0.05 μS/cm or 1 digit, whichever is greater) • Calibration – Offset (0 µS/cm) and cell factor calibration – Choice of 5 standards • Auto-ranging or manual range selection • EC, TDS and Salinity reading modes • Temperature Compensation • Accuracy ± 1.5% full scale • Calibration at 1 or 2 points 0% and 100% (air) • Automatic Temperature Compensation from 0 to +50°C • GLP...

edge™ pH • EC • DO Two USB Ports Hanna Instruments is proud to introduce the world’s most innovative pH meter... edge™. edge is thin and lightweight, measuring just 12.7 mm and weighing 250 grams. edge also has an incredibly wide viewing angle, a 140 mm LCD and a sensitive capacitive touch keypad. edge measures pH, conductivity and dissolved oxygen through its unique digital electrodes. These digital electrodes are autorecognised. Providing sensor type, calibration data and a serial number, they connect to edge using an easy plug-in 3.5mm connector. edge’s versatile design is equally at...

Basic Mode You can use edge in Basic Mode: ideal for routine measurements, it offers a simplified screen and features.

Data from the last calibration you perform is stored in the sensor: electrode’s offset, slope, date, time and buffer/standards. When any sensor (pH, EC, or DO) is connected to the edge, GLP data is automatically transferred. CAL-CHECK® edge features Hanna’s exclusive CAL-CHECK to warn you if the bulb of the electrode is not clean or if the buffers are contaminated during calibration. Zero Footprint Using the wall mount cradle (included), edge can be placed on a wall, leaving zero footprint on the benchtop space. The cradle has a built in connector to power edge and charge its batteries....

Technical Specications Range Calibration Points 5 in standard mode; 3 in basic mode Calibration Buffers Temperature Compensation HI-11310 glass body pH electrode with 1/8”(3.5mm) connector and 1 m (3.3’) cable Electrode Diagnostics basic mode: -2.00 to 16.00 pH, -2.000 to 16.000 pH; standard mode: ±1000.0 mV for pH standard mode: probe condition, response time and out of calibration range EC 0.00 to 29.99 µS/cm; 30.0 to 299.9 µS/cm; 300 to 2999 µS/cm; 30.0 to 200.0 mS/cm; up to 500.0 mS/cm (absolute EC)** 0.00 to 14.99 mg/L (ppm); 15.0 to 149.9 mg/L (ppm); 150 to 1499 mg/L (ppm); 0.0 to...

Ordering Information edge™ is available in 3 congurations: pH, EC and DO All Kits Include: HI-11310 Single ceramic, double junction, refillable pH electrode with temperature sensor Recommended for laboratory and general purpose HI-12300 Double junction, gel filled, PEI body, pH electrode with temperature sensor 2 sachets of pH 4 buffer solutions 2 sachets of pH 7 buffer solutions 2 sachets of pH 10 buffer solutions Electrode cleaning solutions Recommended for field applications HI-10430 Single ceramic,double junction, high temperature glass, refillable pH electrode with double junction...