- Catalogs
- Hanke Crimp-Technik GmbH
- UNI-A 712
UNI-A 712
1 / 2 PagesView full catalog
UNI-A 712
Product catalog summary
General Information
The UNI-A 712 is an approved applicator featuring a pneumatic feed system, designed for processing reeled side feed pre-insulated ferrules with wire cross sections up to 6 mm². It is noted for its lightweight design and ease of parameter adjustment, ensuring high reliability and easy maintenance for consistent availability in daily operations.
The UNI-A 712 is an approved applicator featuring a pneumatic feed system, designed for processing reeled side feed pre-insulated ferrules with wire cross sections up to 6 mm². It is noted for its lightweight design and ease of parameter adjustment, ensuring high reliability and easy maintenance for consistent availability in daily operations.
Special Features
- Simple operation
- Robust design
- Reduced wear due to high precision feeding system
- Adjustments can be made while mounted
Technical Data
- Terminal feed: Side feed
- Feeding system: Pneumatic
- Compressed air connection: 6 bar
- Feed stroke: 1 - 30 mm
- Wire cross-section: 0.08 – 6 mm² (AWG 28 – AWG 10)
- Stroke: 40 mm
- Closing height: 135.78 mm
- Dimensions (WxDxH): 135 x 110 x 175 mm
- Weight: Approximately 2.7 kg
Options
- Quality control photo (micrograph)
- Chrome plated crimp dies
- Kit for short dismantle length
- 7-digit counter
Note: Wire cross-section depends on terminal material, thickness, and crimping area geometry.
Contact Information
Hanke Crimp-Technik GmbH
Hirschfelder Ring 8, 02763 Zittau, GERMANY
Phone: 03583 5183-0
Fax: 03583 5183-30
Email: [email protected]
Website: www.hankect.de
Hanke Crimp-Technik GmbH
Hirschfelder Ring 8, 02763 Zittau, GERMANY
Phone: 03583 5183-0
Fax: 03583 5183-30
Email: [email protected]
Website: www.hankect.de
See more
Catalog excerpts
General Information The UNI-A 712 is the approved applicator with a pneumatic feed system. Developed for the processing of reeled side feed pre-insulated ferrules with a wire cross section up to 6 mm1 2. It is characterized by a low weight and easy adjustment of the setting parameters. The high reliability and easy maintenance ensure a high level of availabilty in day-to-day operations. Special Featutes ► Simple operation ► Robust design ► Less wear due to the high precision feeding system ► adjustments can easily be made while the applicator is mounted Technical Data Options ► Quality control...
Open the catalog to page 2All Hanke Crimp-Technik GmbH catalogs and technical brochures
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.