PP3
1 / 2 PagesView full catalog
PP3
Product catalog summary
General Information
The PP3 Series applicators are designed for use with the StripCrimp PP3, available in two versions: StripCrimp PP3 L for left-side terminal feeding and StripCrimp PP3 R for right-side feeding. Both versions can also accommodate rear feed terminals. The crimping tools operate symmetrically, ensuring the wire and terminal are crimped without altering the cable's position, thus preventing damage or the 'brush effect' on the strands.
Variations
Technical Data
Contact Information
Hanke Crimp-Technik GmbH
Hirschfelder Ring 8, 02763 Zittau
Phone: 03583 5183-0
Fax: 03583 5183-30
Email: [email protected]
Website: www.hankect.de
Note: Information is subject to errors and technical modifications.
The PP3 Series applicators are designed for use with the StripCrimp PP3, available in two versions: StripCrimp PP3 L for left-side terminal feeding and StripCrimp PP3 R for right-side feeding. Both versions can also accommodate rear feed terminals. The crimping tools operate symmetrically, ensuring the wire and terminal are crimped without altering the cable's position, thus preventing damage or the 'brush effect' on the strands.
Variations
- PP3 750: Applicator for side feed terminals with StripCrimp PP3 L.
- PP3 760: Applicator for side feed terminals with StripCrimp PP3 R.
- PP3 850: Applicator for end feed terminals with StripCrimp PP3 L.
- PP3 860: Applicator for end feed terminals with StripCrimp PP3 R.
Technical Data
- Terminal Feed: Side feed / End feed
- Wire Cross-section: 0.051 – 1.5 mm² (dependent on terminal material, thickness, and crimping area geometry)
- Feed Stroke: Side feed: 5 - 15 mm, End feed: 5 - 25 mm
- Dimensions: Side feed: 95 x 85 x 80 mm, End feed: 23 x 105 x 80 mm
- Weight: Approximately 1 kg
Contact Information
Hanke Crimp-Technik GmbH
Hirschfelder Ring 8, 02763 Zittau
Phone: 03583 5183-0
Fax: 03583 5183-30
Email: [email protected]
Website: www.hankect.de
Note: Information is subject to errors and technical modifications.
See more
Catalog excerpts
General Information The PP3 Series applicators as designed for use in the StripCrimp PP3. The StripCrimp PP3 is available in two different versions, the StripCrimp PP3 L for terminal feeding from the left and alternatively the StripCrimp PP3 R suitable for feeding from the right. For both versions applicators for rear feed terminals can be used also. The crimping tools move symmetrically towards the wire and terminal and crimps. The crimped wire with terminal are automatically ejected. The cable’s position remains unchanged during the entire strip- and crimp process, eliminating any damage or...
Open the catalog to page 2All Hanke Crimp-Technik GmbH catalogs and technical brochures
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.