Single Girder Overhead Crane Single Girder Overhead Crane Single Girder Overhead Crane Inquiry Questionnaire Basic Information： 1. Follows the international design code, like FEM, CMAA, EN ISO. 2. The girder is compact, low self-weight, deflection from 1/700 ~ 1/1000, and follows ISO 15614 or AWS D14.1 welding specification 3. The low headroom design leads to optimization of the work area to the users benefit. 4. The control panel is IP55 with socket for easy installation, follow IEC standard. 5. SA2.5 Surface pre-treated by blasting according to ISO8501-1; C3-C5 painting system according to ISO 12944-5. Lifting Height Main Features: 2 Span (m) 3 Lifting Height(Under Hook) (m) Remote control Pendent control 4 Lifting Speed (m/min): Work Duty Group 5 FEM: 1Bm, 1Am, 2M, 3M ISO: M3, M4, M5, M6 6 Long Travel Speed (m/min) 7 Long Travel Length (m) 8 Control Model Cabin, Pendent or Remote control Is installed accessories required? Like crane rail, bus bar etc. Site Conditions： 11 Outdoor Or Indoor Long Travel Speed Lifting Motor Crane Power Trolley Motor Trolley Speed Lifting Speed Long Travel Motor Bridge Motor Girder Long Travel Control Panel Power Supply System Total Crane Weight Max.Wheel Load Wheel Dia. Model of End Carriage Gear Motor Model Crane Wheel Qty. Recommended Crane Rail