NAN E Cranes & Components Mobile Electrification System NANTE HTR series High Tro Reel System is a new Type of industrial mobile power feeding system. It can be 3, 4, 6 poles with current capacity from 50A to 140A. • Safe, Stable, Seamless. • Light weight, Simple structure, Easy for carry and install. • Copper contact closely with insulated sleeve, no bad contact due to vibration. • Insulated material is special formula PVC, which is impact resistant, uv resistant. • Suitable for various kind of curve runway. ( Curve R.>0.6m ) Poles: 3P/ 4P/6P Max.current: 140 A Max.Voltage: 600V Material: Conductor Bar: Copper Insulation: PVC ( heat resistance: 75 tJ ) Sparts: Plastic / Gavlvanied Steel

■ HTR Accessories - Current Collector HTR-CC-3/60A / HTR-CC-4/60A / HTR-CC-6/60A Conductor Cross Section (mm2)

■ HTR Accessories - Support Bracket HTR-SB Stepl. Support Design Remark: 1) The side design installment is recommeded when a camber occurs to the 3-6P safty power rail assebly 2) The hanger clamps are supposed to be installed every 0.5meter from the starting point of the running. 3) The 3-6P tension part for safety power rails must be installed at the place about 10mm higher than the hanger clamp This step prevents water from flowing to the power-in place along the safety power rails; so the short circuit will not happen 4) The silica gel must be coated on the connected place of the power-in...