Double Girder Overhead Crane Double Girder Overhead Crane Double Girder Overhead Crane Inquiry Questionnaire 1. Follows the international design code, like FEM, CMAA, EN ISO. Basic Information： 2. The girder is compact, low self-weight, deflection from 1/700 ~ 1/1000, and follows ISO 15614 or AWS D14.1 welding specification. 4. Bogie design for the end carriage to make sure the long travel running is more smooth. 3. Can be equipped with low headroom double girder hoist or open winch which can achieve to M7 duty group. 4 Lifting Speed (m/min): 3 Lifting Height(Under Hook) (m) Remote control Pendent control 5. Expect overload limiter, hook high and down limiter, cross limit switch, we can design the dual brake system and dual height limiter for double safety. Lifting Height Main Features: 6 Long Travel Speed (m/min) 6. SA2.5 Surface pre-treated by blasting according to ISO8501-1, C3-C5 painting system according to ISO 12944-5. 7 Long Travel Length (m) 8 Control Model Cabin, Pendent or Remote control Is installed accessories required? Like crane rail, bus bar etc. Site Conditions： 11 Outdoor Or Indoor Capacity Long Travel Speed Trolley Speed Lifting Speed Crane Power Trolley Motor Lifting Motor Long Travel Motor Bridge Motor Girder Maintenance platform Long Travel Control Panel Power Supply System Max.Wheel Load Total Crane Weight Model of End Carriage Gear Motor Model Pcs Recommened Crane Rail