CE
1Pages

ISET S.r.l. Unipersonale Sede Legale e Uffici Via Donatori di sangue, 9 - 46024 Moglia (MN) Cod. Fisc. e P.IVA Reg. Imprese CERTIFICATE Certificat - Certificado- Сертификат - Zertifikat - 證書 1) APPLICANT: (who finally puts the product on the market) Hangzhou IECHO Science & Technology Co., Ltd No.1 Building, NO.1 Weiye Road, Binjiang District, Hangzhou city, Zhejiang Province, China. MANUFACTURER: Hangzhou IECHO Automatic Technology Co., Ltd Building 11(C1), NO.20 Dongqiao Road, Dongzhou Subdistrict, Fuyang District, Hangzhou city, Zhejiang Province, China. 2) CERTIFICATE NO.: ISETC.001020200528 TECHNICAL REFERENCE: IECHO-2020A01 3) ISET MARK: 4) CAUTION ABOUT CE MARKING (Instruction for the Applicant who puts the product on the EU market): The label of the CE Marking on the left side should be not less than 5mm height. CE Marking and EC Declaration of Conformity are duties for the manufacturer or its applicant who puts the product on the market. This one is responsible to start the CE marking and certification procedure as required by the legislation in force. Only for the products which are compulsorily included into specific Directives or Regulations will be necessary to appoint a Notified Body. 5) TYPE OF PRODUCT: Digital Cutting Machine MODEL(S): BK, BK2, BK3, BKL, BKM, BKMS, GLK, LCP, SC, SCT, TK, TK3S, GLS, LCPS, PK, VK, TK4S, SK2 6) LIST OF DIRECTIVES / REGULATIONS /STANDARDS (as declared by the manufacturer itself) Machinery Directive 2006/42/EC, Low Voltage Directive 2014/35/EU, Electromagnetic Compatibility 2014/30/EU EN 12044:2005+A1:2009; EN 60204-1:2018, EN 61000-6-1:2019, EN 61000-6-3:2007+A1:2011 7) NOTE: This document is not referred to any evaluation that could be considered as included in the scope of the activities covered by the standard BS EN ISO/IEC 17065:2012 or European Regulation 765/2008. 8) REMARK: Certificate is issued on voluntary application from the Client and it gives to the applicant the right to use and affix the ISET Mark on their products, even if it doesn’t imply any assessment on the safety and compliance of the product. ISET declares that the only scope of the assessment is to verify the existence of the declaration issued by the manufacturer or an applicant under its own responsibilities. 9) DATE OF ISSUE: 28/05/2020 EXPIRY DATE: 27/05/2025 10) SIGNATURE: Xiao Ming (On behalf of the Legal