Single stroke Product weight Maximum allowable gripping distance Theoretical maximum gripping force: opening/closing Minimum Spring Locking Force Opening/closing time Gas consumption of single opening and closing cycle Operating B air pressure range/bar Specification of air connection port 签字 Temperature range of application/°C Maximum allowable single-finger gripping weight/kg 日期 8 Gripper mounting and positioning A Compressed air connection port A 材料 B sensor B Location of inductive proximity B 标记 处数 Positive-pressure air blowing hole/grease C 日期 105 injection hole 阶段标记 重量 设计 比例 年 月 日 D Bottom ventilation hole (version-B) 校核 sensor比例 E Location of magnetic proximity 15.612 主管设计 审核 A-A 2 共 1 张 Self-locking 第 1 张 版本 批准 FR191-525-L-NC/NO 4 Built-in spring, mechanical self-locking 5 Gripper mounting hole 重量 比例 标记 处数 Sealing 分区ring 更改文件号 签名 年 月 日 阶 段 标 记 φ5*1.5 名称 0.018 设计 290 2- 标准化 12 0 18 15.612 比例 工艺 6 校核 A 标记 处数 分区 更改文件号 签名 零件号 主管设计 审核 标准化 设计 Gripper shell 版本 替代 共 1 张 第 1 张 校核 批准 工艺 旧底图总号 底图总号 Dust-proof module, IP64 for the positive-pressure air blowing hole after it, is connected 3 to the compressed air of 0.05-0.10MPa, otherwise, IP50 闭399/开539 Bottom cover plate of gripper P: Compressed air pressure [bar] Gas consumption: volume of gas consumed at normal pressure (0.5MPa) Repeated gripping accuracy/mm Workpiece weight 1 Mounting hole of gripping finger Product attributes 限公司 州弗克机械科技有限公司 *Two sensors are required for each gripper. For the detailed monitoring of two positions, see the sensor appendix. Magnetic proximity sensor 描图 MZC2-1V7NS-FU0 Magnetic, NPN, 3-core3m Without self-locking Gripping finger location pin bushing (standard) Without dust cover Self-locking form B Inductive proximity sensor Increased gripping force Standard version M