Extensive range of optional modules It can be matched with various optional modules to meet the requirements of dust prevention, self-locking, high temperature resistance, etc. according to the special use conditions of different industries. Dust-proof module (optional) Inductive proximity sensor(optional) | Structure Design of Three-tooth Guide Rail Referring to the chuck structure, the three-tooth guide rail has higher bearing capacity and longer service life than the conventional guide rail with the T-shaped groove. | Wedge drive mode Thanks to excellent drive structure, it has the characteristics of high load and high centering accuracy | Anodized aviation aluminum housing By adopting the high-quality aviation aluminum housing, the gripper is ensured to have the characteristics of high load while minimizing the weight. FZ toothed three-finger gripper seriesFOUK-FZ For the standard pneumatic three-finger gripper, FOUK adopt high. strength materials and the surface treatment process of strong wear resistance, which ensures the reliability and service life of the product in use. eanwhile, it has abundant optional interfaces to adapt to the complex working conditions of various industries. Usage Video of FZ Series Products Product Code P: Compressed air pressure [bar] Gas consumption: volume of gas consumed at normal pressure (0.5MPa)

FOUX End-of-Arm Tooling Toothed three-finger gripper series FOUK-FZ Static load-bearing torque Gripping force curve 500 FZ 34 - 68 - B - C18 - P - NO - H Serial No. Cylinder bore Toothed three-finger I FZ I gripper Maximum shell diameter Length of push rod Dust cover IP64 Self-locking form High ternfjenrture resistance / I Without dust cover I Inductive proximity sensor Magnetic proximity sensor 'Two sensors are required for each gripper. For the detailed monitoring of two positions, see thesensorappendix. (j^Gripping finger location pin bushing (standard) 2^ Mounting hole of gripping finger...

End-of-Arm Tooling Toothed three-finger gripper series FOUK-FZ Gas consumption of single opening and closing cycle Minimum Spring Locking Force Opening/closing time Repeated gripping accuracy/mm Operating air pressure range/bar 借(通)用件登记 底图总号 底图总号 借(通)用件登记 Connecting plate Dust-proof module, IP64 for the positive-pressure air blowing hole after it, is connected to the compressed air of 0.05-0.10MPa, otherwise, IP50 旧底图总号 零件代号 Temperature range of application/°C Specification of air connection 描图 port P: Compressed air pressure [bar] Gas consumption: volume of gas consumed at normal pressure (0.5MPa)...

End-of-Arm Tooling Without push plate Gas consumption of single opening and closing cycle Minimum Spring Locking Force Workpiece weight Opening/closing time 杭州弗克机械科技有限公司 材料 Repeated gripping accuracy/mm Operating air pressure range/bar Specification of air connection port 描校 Connecting plate Temperature range of application/°C Dust-proof module, IP64 for the positive-pressure air blowing hole after it, is connected to the compressed air of 0.05-0.10MPa, otherwise, IP50 P: Compressed air pressure [bar] Gas consumption: volume of gas consumed at normal pressure (0.5MPa) Maximum allowable single-finger...

End-of-Arm Tooling Single stroke Product weight Maximum allowable gripping distance Gas consumption of single opening and closing cycle Minimum Spring Locking Force Opening/closing time Temperature range 描校 of application/°C Operating air pressure range/bar Built-in spring, mechanical self-locking 日期 B 张 第 1比例 张 版本 标记 处数 分区 更改文件号 签名 批准 年 月 日 阶 段 标 记 共 1重量 重量 比例 标记 处数 分区 更改文件号 签名 年 V月 日 阶 段 标 记 2 3 标准化 设计 比例 2 : 1 at bottom 标准化Ventilation 设计 FZ70-125-P Dust-proof FZ70-125-B 比例 工艺 校核 工艺 Dust-proof module, IP64 for the positive-pressure air blowing hole after it, is校核 主管设计 审核 connected to the compressed...

Increased gripping force Standard version M Inductive proximity sensor Magnetic proximity sensor Product weight Maximum allowable gripping distance Theoretical maximum gripping force: opening/closing Minimum Spring Locking Force Maximum allowable single-finger gripping weight/kg Repeated gripping accuracy/mm Operating air pressure range/bar E Location of magnetic proximity sensor The length A of the push rod can be of the standard version or the extended version, with loading function, and the minimum thrust of the push plate is 105N. Built-in spring, mechanical self-locking 旧底图总号 底图总号 底图总号 旧底图总号...

Toothed three-finger gripper series FOUK-FZ Gripping distance/mm 35mm 43mm Without push plate Inductive proximity sensor Magnetic proximity sensor Product weight Maximum allowable gripping distance Theoretical maximum gripping force: opening/closing Gas consumption of single opening and closing cycle Minimum Spring Locking Force Opening/closing time Repeated gripping accuracy/mm Operating air pressure range/bar 旧底图总号 Temperature range of application/°C 4 杭州弗克机械科 杭州弗克机械科技有 杭州弗克机 日期 材料 重量 比例 标记 处数 分区 更改文件号 签名 日期 年月日 阶段标记 名称 日期 阶段标记 重量 比例 标记 设计 处数 分区 更改文件号 标准化签名 年 月 日 重量比例 比例 名称 标记 处数 分区 更改文件号 签名...

End-of-Arm Tooling P: Compressed air pressure [bar] Gas consumption: volume of gas consumed at normal pressure (0.5MPa) 描图 Maximum allowable single-finger gripping weight/kg Repeated gripping accuracy/mm Operating air pressure range/bar A Compressed air connection port B Location of inductive proximity sensor C Positive-pressure air blowing hole/grease 6 Mounting and positioning pin hole injection hole E Location of magnetic proximity sensor The length A of the push rod can be of the standard version or the extended version, with loading function, and the minimum thrust of the push plate is 210N....

Without dust cover Without push plate Product weight Workpiece weight Opening/closing time Repeated gripping accuracy/mm Operating air pressure range/bar Specification of air connection port 描校 Temperature range of application/°C 旧底图总号 E FZ185-292-NC/NO Self-locking E Built-in spring, mechanical self-locking 杭州 材料 日期 13 更改文件号 签名 日期年 月 日 阶 段 标 记 材料 重量 比例 材 标准化 零件代号 重量 6.148比例 比例 标记2 设计 处数 分区 更改文件号 签名 年 月 日期 日 阶 段 标 记 日期 1 阶 段 标 记3 重量 比例 标记 处数 分区 更改文件号 签名 年 月 日 工艺 校核 段标记 设计 标记 标准化 处数 分区 更改文件号 签名 年 月 6.306 日 阶比例 132.5 借(通)用件登记 标准化 设计 主管设计 审核 比例 5.516 校核 标准化 设计 工艺 共 1 张 第 1 张 版本 工艺 校核 批准 主管设计 校核...