Catalog excerpts
• Support 8 Fast Ethernet ports and 3 Gigabit Ethernet ports • PoE is in compliance with the IEEE802.3af/at standards • Support the ABRing® self-healing loop, with the self-healing time less than 5ms. • Support the relevant functions, such as the VLAN, GVRP, QoS, RSTP and ACL. * Support the IGMP snooping, GMRP and static multicast • Support the wide voltage input of 12~57VDC and facilitate the deployment * Allow the selection of the ABPass® light path protective module • Support the port trunking or rate limit and broadcast storm control AOBO 6211S series of PoE Gigabit Ethernet industrial switches support 1-3 Gigabit Ethernet ports and 8 Fast Ethernet electrical ports and remain compatible with the IEEE802.3af/at standards. Each port is allowed to provide 30 W power. They have the capacity to detect, identify and classify the different PD demands automatically, permit the plug and play and ensure the simple and convenient usage, without the need to implement the configuration. The products provide the wireless access point, IP voice call and camera with the Ethernet power supply conveniently, therefore eliminating the necessity of arranging the power supply wiring additionally and simplifying the installation. The distributed ABRing® self-healing loop technology is capable of improving the high reliability of the industrial network effectively and realizing the self-healing within 5ms. AOBO 6211S series support the rich network management functions, such as STP/RSTP/MSTP, port trunking, IGMP Snooping, GMRP, ACL and GVRP, and many management methods, such as the SNMP network management, Web, Telnet and ABNet dedicated network management software. Interface Gigabit Ethernet electrical port: 10/100/1000BaseT(X) self-adaptation Gigabit Ethernet optical port: 100/1000Base-X - SFP slot 10/100/1000Base-T(X) SFP slot Transmission distance: Multimode : 2KM^ 4KM Single mode : 20^120KM Interface Fast Ethernet electrical port: 10/100BaseT(X) self-adaptation RJ45 connection interface MDI/MDI-X automatic crossover Full duplex and half duplex automatic switchover Switch attributes MAC table:1K Switching delay:<10us Transmission bandwidth:3.2Gbps aobo@hz-aobo. com/www. en. hz-aobo. com
Open the catalog to page 1
Industry Standard: EMI: FCC CFR47 Part 15,EN55022/CISPR22,Class A EMS: IEC61000-4-2(ESD) Level 4 IEC61000-4-3(RS) Level 3 IEC61000-4-4(EFT) Level 4 IEC61000-4-5(Surge) Level 4 IEC61000-4-6(CS) Level 3 IEC61000-4-16(Common mode conduction) Level 4 Standards IEEE 802.3 10Base-T IEEE 802.3u 100Base-T IEEE 802.3ab 1000Base-T IEEE 802.3z 1000Base-X IEEE 802.3at/af PoE Mechanical structure: Enclosure: Aluminum profile Protection class:IP40 Size:103.5mmx53mmx143mm Weight:0.62kg Installation method: rail type Power supply: Input voltage:42~57VDC redundant power input Power: 7.9W(full load) Overload...
Open the catalog to page 2
aobo@hz-aobo. com/www. en. hz-aobo.com
Open the catalog to page 3All HANGZHOU AOBO TELECOM. catalogs and technical brochures
-
Embedded Ethernet Module1 Pages
