Catalog excerpts
6211 8+3G managed rail-type Gigabit Ethernet industrial switches • It can at most support 3 Gigabit Ethernet optical ports, 7 Fast Ethernet electrical interfaces and Gigabit Ethernet Combo port; • Support the Gigabit Ethernet ABRing loop network and provide the backbone bandwidth; • Support such network management functions as the QoS, VLAN, multicasting, port rate limit, broadcast storm control, port self-loop detection and alarm setting; • Support the concentrated management of the dedicated network management software ABNet, automatic topology discovery, remote fault location and status monitoring; • Allow the selection of the ABPas#outage light path protective module. AOBO 6211 series of self-healing loop industrial Ethernet switches support 8 Fast Ethernet ports and 1-3 Gigabit Ethernet ports and the users are allowed to build the network structure of the different topology types flexibly based on the actual demands of the industrial environment. The distributed ABRinjf self-healing loop technology is capable of improving the high reliability of the industrial network effectively and realizing the self-healing within Sms. AOBO 6211 series support the rich network management functions, such as STP/RSTP/MSTP, port trunking, IGMP Snooping, ACL and GVRP, and many management methods, such as the SNMP network management, Web, Telnet and ABNet dedicated network management software. This series of switches employ the IP40 metal shell, fan less design and low power consumption and possess the good adaptability to the extreme environment temperature and proper EMC. They can operate stably and reliably for a long time under the adverse industrial environment and have been widely applied to the industrial fields of the wind farm, power distribution net, traffic and petroleum. Standards: IEEE 802.3 lOBase-T IEEE 802.3u 100Base-T IEEE 802.3ab lOOOBase-T IEEE 802.3z lOOOBase-X ANSI/IEEE 802.3 NWay Interface: Fast Ethernet electrical port: 10/10GBaseT(X) self-adaptation RJ45 connection interface MDI/MDI-X automatic crossover Full duplex and half duplex automatic switchover Switch attributes: Priority queue: 8 VLAN number: 4K VLAN ID; 1-4093 MAC table; 8k Switching delay: <10us Transmission bandwidth; 3.2Gbps Interface: Gigabit Ethernet electrical port: 10/100/1 OOOBaseT (X)self-adaptation Gigabit Ethernet optical port: lOO/IOOOBase-X, SFP slot _ 1 aobo@hz-aobo. com/www. en. hz-aobo. com
Open the catalog to page 1
62118+3G managed rail-type Gigabit Ethernet industrial switchesPerformance parameters Interface: Transmission distance: Multimode 2KM, 4KM, 5KM, Single mode 20-120KM Mechanical structure: Enclosure: Aluminum profile Protection class: IP40 Size: 103.5mm*53mmx143mm Weight: 0.6kg Installation method: Rail type Quality Assurance: MTBF: 800,000h Warranty period: Syears Industry Standard: EMI: FCC CFR47 Part 15,EN55022/CISPR22,Class A EMS: IEC61000-4-2(ESD) Level 4 IEC61000-4-3(RS) Level 3 IEC61000-4-4(EFT) Level 4 IEC61000-4-5(Surge) Level 4 IEC61000-4-6(CS) Level 3 IEC61000-4-16(Common mode...
Open the catalog to page 2
62118+3G managed rail-type Gigabit Ethernet industrial switchesOrdering Information Model aobo@hz-aobo. com/www. en. hz-aobo.com
Open the catalog to page 3All HANGZHOU AOBO TELECOM. catalogs and technical brochures
-
Embedded Ethernet Module1 Pages
