Catalog excerpts
• Adopt the power supply technology through serial ports without the necessity of the additional power supplies; • Standard RS-232 3-wire interface; • +/-15KV (anti-static) ESD protection; • Maximum communication rate: 115.2Kbps; • Optical fiber transmission distance: 4000m for the multimode; • Operating temperature: -300-700. AOBO 10011 series converter is the extra small converter that supports the asynchronous RS-232 and optical fibre MODEM of the communication interface is the optimal solution for connecting the remote terminal unit (RTU) to the host or distributed data acquisition system (SCADA) controller. It supports the RS-232 asynchronous communication protocol. The RS-232 method employed by AOBO 10011 series supports the data (TXD or SD) transmission and control to improve the capability to adapt to different software and simplify the control method. Fiber optic MODEM supports several fibre-optic methods between the asynchronous serial ports and the communication distance may, at maximum, reach the multimode 4KM. The maximum transmission rate of the RS-232 signal is 115.2KBPS and the interfaces with different electrical standards can be mixed. It is unnecessary to connect the power source externally, since it is driven by the unique “RS-232 charge pump" and power is supplied without depending upon the initialized RS-232 serial port. The automatic receiving-transmission switching for the zero time delay is available inside it and the unique I/O electric circuit is used to control the direction of data flow automatically without requiring any handshaking signal (such as RTS and DTR), so as to guarantee the program written under the mode of RS-232 half-duplex and offer the excellent EMI/RFT properties. AOBO 10011 series support the transmission of two data signals:sending data and receiving data. RS-232 and fiber optic are connected via DB9 female head and two ST interfaces respectively and this series can be dismantled and installed conveniently. • Support the RS-232/ST interface; • Asynchronous transmission: point-to-point application, with the maximum rate being 115.200bps; •Transmission distance: 4000m for the multimode; • Operating temperature: -30°070°C; • Relative humidity: 5%-95%; • Operating wavelength: 850nm (multi-mode); aobo@hz-aobo. com/www. en. hz-aobo. co
Open the catalog to page 1
10011 industrial passive serial optical fiber converterPerformance parameters Electrical interface: RS-232: adopt the DB9 hole-type connector; Fiber interface: ST interface (other interfaces can be customized); RS-232 interface features: standard RS-232 three-wire interface+/-15KV (Anti-static); Provide the ESD protection. Support the maximum rate of 115.2Kbps; Adopt the power supply technology through serial ports without the necessity of the additional power supplies. Fibre-optic link AOBO 10011 series of passive serial port-fiber modules use two separated optical transmitter and...
Open the catalog to page 2All HANGZHOU AOBO TELECOM. catalogs and technical brochures
-
Embedded Ethernet Module1 Pages
