Catalogs >
HANGZHOU AOBO TELECOM.,LTD. >
126B/126D Industrial Serial Data Optical Transceiver

126B/126D Industrial Serial Data Optical Transceiver
3Pages

Catalog excerpts

126B/126D Industrial Serial Data Optical Transceiver - 1

OBO 126B/126D Industrial Self-healing Loop Serial Data Optical Transceiver • Support the selection of RS485/RS232/RS422/TTL fiber interface? Allow the selection of the ABPassf® light path protective module? • Provide the inbuilt ABRin^f distributed high self-healing loop network protocol and link switching of the seif-healing loop without the packet loss? • Support the access from any station and realize the iManager network management function, equipment configuration, status inquiry and alarm function? • Support the function of the port data mirroring and facilitate the system maintenance and debugging? • Support the RS485 line fault protection. AOBO 126B/126D series of industrial self-healing loop data optical transceiver are a type of the self-healing loop serial optical fibre communication equipment. In the application networking, a set of AOBO 126B/126D equipment is used as the master station equipment. One or more AOBO 126B equipment is considered as the standby master station equipment or slave station equipment. The number of station equipment in each self-healing loop network may reach 128 at most; a maximum of 6 (or 10) serial channels are allowed to be set between the equipment of the master and slave stations to attain the simultaneous communication. AOBO 126B series support the wide temperature range (-40°C~+85°C), strong resistance to electromagnetic interference, over-voltage protection, 24VDC redundant double power input, DIN rail and wall mounting and are capable of operating stably under the adverse industrial environment. AOBO 126B/126D series of industrial selfhealing loop serial data optical transceiver can be widely applied to the road monitoring and other scenarios needing the data acquisition, such as the electronic monitoring data acquisition and industrial process control. Transmission Distance: Serial port: RS232:15M, RS422/RS485:1200M, TTL Serial fiber: 4KM Optical fiber interface: Multimode fiber : 2KM/5KM Single-mode fiber: 20KM/40KM/80KM Interface: Optical Port: 2 optical ports , Single/multimode Optional SC, ST, FC interfaces Serial Port: Support four or six or more RS232 / RS422 / RS485 standard Asynchronous rate: 0 ~ 230.4 KBPS (adaptive) Ber 10-10 or less Plug in the connector terminals, the spacing of 5.08 mm The interface protection: Line Surge Protection: 2 KV , ESD Protection: 15 KV Isolation: 2 KV aobo@hz-aobo.com / www.en.hz-aobo.com

Open the catalog to page 1

126B/126D Industrial Serial Data Optical Transceiver - 2

126B/126D Industrial Self-healing Loop Serial Data Optical Transceiver Industry Standard: EMI: FCC CFR47 Part 15, EN55022/CISPR22, Class A EMS: IEC61000-4-2(ESD) Level 4 IEC61000-4-3(RS) Level 3 IEC61000-4-4(EFT) Level 4 IEC61000-4-5(Surge) Level 4 IEC61000-4-6(CS) Level 3 IEC61000-4-16(Common mode conduction) Level 4 Machinery: IEC60068-26(Vibration) IEC600682-27(Impact) IEC60068-2-32(free fall) Mechanical Structure: Enclosure: Metal material, No fan Protection class: IP30 Size: 108mmx36.5mmx147mm Weight: 0.3kg Installation method: Rail type Power Supply: Input Voltage: 12 — 36VDC...

Open the catalog to page 2