10 ports gigabit Ethernet switches with DIN rail / AOBO 6010s

Product catalog summary

Product Introduction: The AOBO 6010S 7+3G is a managed rail-type Gigabit Ethernet PoE industrial switch designed for robust industrial environments. It supports 1-3 Gigabit Ethernet optical ports, 4-8 Fast Ethernet PoE electrical ports, and Gigabit Ethernet Combo ports. The switch complies with IEEE802.3af/at PoE standards and features advanced PoE management functions.

Performance Parameters: The switch supports ABRing® high self-healing loop protocol with a self-healing time of less than 5ms. It offers network management functions such as QoS, VLAN, port rate limit, broadcast storm control, and multicasting. The switch can be managed centrally using ABNet network management software and supports the ABPass® outage light path protective module.

Interface: The switch includes Fast Ethernet electrical ports with 10/100BaseT(X) self-adaptation, RJ45 connection interface, and automatic crossover. Gigabit Ethernet electrical ports support 10/100/1000BaseT(X) self-adaptation, while optical ports support 100/1000Base-X with SFP slots. The console interface includes RS232 and RJ45 ports.

Transmission and Capacity: The transmission distance for multimode is 2KM to 4KM, and for single mode, it ranges from 20KM to 120KM. The switch supports a priority queue of 4, VLAN number of 4K, VLAN ID range of 1-4093, and a MAC table of 8K. It has a switching delay of less than 10 microseconds and a transmission bandwidth of 32Gbps.

Power Supply and Protection: The switch operates with an input voltage of 42~57VDC or 85~264VAC/120~370VDC. It features overload, reverse connection, and redundancy protection. The enclosure is made of aluminum profile with an IP30 protection class, and it is designed for rail-type installation.

Environmental and Standards Compliance: The switch operates in temperatures ranging from -40℃ to +85℃ and supports relative humidity of 0-95% non-condensation. It complies with various EMI and EMS standards, including FCC CFR47 Part 15 and IEC61000 series. The MTBF is 800,000 hours, and it comes with a 5-year warranty.

Ordering Information: Various models are available, such as AOBO 6010S-2ND-6MT-1GX and AOBO 6010SP-2ND-7MT-2GX-1GC, each with different configurations of Fast Ethernet PoE ports, Gigabit Ethernet SFP slots, and combo interfaces. Options include dual power supply and light path protection functions.

Catalog excerpts

10 ports gigabit Ethernet switches with DIN rail / AOBO 6010s-1

AOBO 6010S 7+3G managed rail-type Gigabit Ethernet PoE industrial switches • Support 1-3 Gigabit Ethernet optical ports, 4-8 Fast Ethernet PoE electrical ports and Gigabit Ethernet Combo ports * Support ABRing® high self-healing loop protocol, with the self-healing time less than 5ms. * Advanced PoE management functions, status management and power limitation * Support the following network management functions, including the QoS, VLAN, port rate limit, broadcast storm control and multicasting * Support the concentrated management with the help of ABNet network management software * Allow the selection of the ABPass® outage light path protective module * PoE is in compliance with the IEEE802.3af/at standards AOBO 6010S series of Gigabit Ethernet PoE industrial Ethernet switches support 1-3 Gigabit Ethernet optical ports (Combo interface) and 4-8 Fast Ethernet PoE electrical ports and provide the PD terminal consistent with the 802.3af/at standards (network camera, IP telephone and wireless AP) with a maximum of 30W power supply directly, making it unnecessary for the users to arrange the power-supply wiring additionally. This series support the rich network management functions, such as the ABRing®, QoS, VLAN, multicast management, port self-ring detection and mirroring. The user has the option to configure the ABRing® outage light path protective module and support the function of the optical bypass under the circumstance of the equipment power outage. This series of switches are specially developed for the adverse industrial operating environment and comply with the highest power level EMC and thunder-strike prevention standard. Furthermore, they adopt the solid aluminum alloy shell, which could resist the vibration and impact and ensure the stable operation under the temperature of -40°C~+85°C. Interface Switch attributes Fast Ethernet electrical port: 10/100BaseT(X) self-adaptation RJ45 connection interface MDI/MDI-X automatic crossover Full duplex and half duplex automatic switchover Gigabit Ethernet electrical port: 10/100/1000BaseT(X) self-adaptation Gigabit Ethernet optical port: 100/1000Base-X, SFP slot console:RS232,RJ45 port Transmission distance: Multimode: 2KM^ 4KM Single mode: 20~120KM 1 aobo@hz-aobo. com/www. en. hz-aobo. com

Open the catalog to page 1

10 ports gigabit Ethernet switches with DIN rail / AOBO 6010s-2

AOBO 6010S 7+3G managed rail-type Gigabit Ethernet PoE industrial switchesPerformance Parameters Industry Standard: EMI: FCC CFR47 Part 15,EN55022/CISPR22,Class A EMS: IEC61000-4-2(ESD) Level 4 IEC61000-4-3(RS) Level 3 IEC61000-4-4(EFT) Level 4 IEC61000-4-5(Surge) Level 4 IEC61000-4-6(CS) Level 3 IEC61000-4-16(Common mode conduction) Level 4 Standards IEEE 802.3 10Base-T IEEE 802.3u 100Base-T IEEE 802.3ab 1000Base-T IEEE 802.3z 1000Base-X IEEE 802.3at/af PoE ANSI/IEEE 802.3 NWay Mechanical structure: Enclosure: Aluminum profile Protection class:IP30 Size:103.5mm*53mm*143mm Weight:0.62kg Installation...

Open the catalog to page 2