Catalogs >
HANGZHOU AOBO TELECOM.,LTD. >
1 or 2 Serial Port/Fiber port Industrial Serial Data Optical Transceiver

1 or 2 Serial Port/Fiber port Industrial Serial Data Optical Transceiver
3Pages

Catalog excerpts

1 or 2 Serial Port/Fiber port Industrial Serial Data Optical Transceiver - 1

102 Industrial Self-healing Loop Serial Data Optical Transceiver • Each set of equipment offers 1-4 RS232/485/422 interfaces and self-healing loop can be made for the 2-way optical port to ensure the communication reliability; • Allow the selection of the ABPass® light path protective module; • Utilize the master-slave working mode in which the slave mode can be used as the repeater; • The industrial optical-electric device provides the good optical-electric features and long service life and ensures the reliable data transmission. AOBO 102 series of industrial self-healing loop serial data optical transceiver transmits the serial port data through the selfhealing optical-fibre loop network to form the reliable and long-distance data communication network. The equipment provides 1-4 serial data transmission channels. The equipment may form the highly reliable double/single fiber self-healing loop data transmission network, or the multi-node bus cascade network. The equipment has the perfect network management functions and displays the working and environmental state of the node. The equipment supports the wide temperature range (-40°C—+85 °C), strong resistance to electromagnetic interference, over-voltage protection, 24VDC redundant double power input, DIN rail and wall mounting and is capable of operating stably under the adverse industrial environment. 102 series of industrial self-healing loop serial data optical transceiver can not only be used for the road monitoring, but also be applied to other scenarios needing the data acquisition, such as the electronic monitoring data acquisition and industrial process control. AOBO 102 series self-healing ring industrial serial asynchronous center data optical transceiver is used to connect the computer/Controller and multiple remote workstations/terminal - Through optical fiber connection between them- The master node to receive data from a computer center, through the optical fiber to send data to the far side from the node, and by from the node to the remote device (computer/controller/terminal) .Distant from the node from the remote device(computer/controller/terminal)Receive data,The host and transfer back to the center. AOBO 102series Self-healing ring industrial optical transceiver provides full-duplex RS232 data port, or full duplex 4 line RS422/485 data port, also can realize 2 line half duplex RS485 ports- The transparent transmission on the data, full-duplex top speed of 256 KBPS (RS422)- Can provide the following configuration aobo@hz-aobo.com / www.en.hz-aobo.com

Open the catalog to page 1

1 or 2 Serial Port/Fiber port Industrial Serial Data Optical Transceiver - 2

AOBO 102 Indu strial Self-healing Loop Serial Data Optical Transceiver Repeater configuration: This configuration is mainly used to extend the transmission distance. Point-to-point transmission: This is one of the simplest and the most commonly used configuration, can achieve multiple point-to-point transmission of data. Multi-node bus cascade technology: A cost optimization solution, along the railway, highway, tubing or gas pipe is suitable for adopting this solution. Double/single fiber self-healing ring technology: This is a highly reliable data transmission technology, when a node...

Open the catalog to page 2