Small Case Electronic Enclosures (Supplement)
32Pages

Plastic Enclosures Extruded Aluminum Enclosures NEED MORE INFORMATION? files and color photos visit Ei.ECTKONtCS GROUP

ABS Plastic - Soft Sided Hand Held (1553 Series) KEY FEATURES • Choice of two versions (with or without battery door and compartment) - in two sizes - in six color combinations. • Molded in general purpose ABS plastic with a soft grey or black overmold soft plastic grip. • Top cover is recessed for membrane display or keypad. • P.C. board standoffs are molded into case. • Includes removable front panel (for easy modifications) and assembly hardware. • Battery door & compartment version includes 4 battery clips (for 2 - AA batteries) and a 9 volt (PP3) battery clip. • Choice of five...

ABS Plastic Hand Held (1593 Series) KEY FEATURES • Electronic instrument enclosures, ideally suited for mounting printed circuit boards. • Ergonomically designed for a comfortable fit to the user’s hand. • Two piece lap joint construction provides protection against dust accumulation and splashing water. • Molded in translucent blue ABS plastic (translucent to blue white and near white LEDs, readouts & displays). • Unit is secured with self tapping screws. • Recessed top for membrane display or pad. • Four P.C. card standoffs molded in bottom. • Removable front & rear panels for easy...

ABS Plastic Hand Held (1593 Series) KEY FEATURES • Electronic instrument enclosures, ideally suited for mounting printed circuit boards. • Ergonomically designed for a comfortable fit to the user’s hand. • Two piece lap joint construction provides protection against dust accumulation and splashing water. • Molded in translucent blue ABS plastic (translucent to blue white and near white LEDs, readouts & displays). • Unit is secured with self tapping screws. • Recessed top for membrane display or pad. • Four vertical P.C. card guides molded in. • Long life battery door with our “three snap”...

ABS Plastic Hand Held (1593 Series) KEY FEATURES • Electronic instrument enclosures, ideally suited for mounting printed circuit boards. • Ergonomically designed for a comfortable fit to the user’s hand. • Two piece lap joint construction provides protection against dust accumulation and splashing water. • Molded in translucent blue ABS plastic (translucent to blue white and near white LEDs, readouts & displays). • Unit is secured with self tapping screws. • Recessed top for membrane display or pad. Part Number Removable Panels KEY FEATURES • Electronic instrument enclosures, ideally suited...

Thick Wall RFI - (1594 RFI Series) KEY FEATURES • Designed for EMI/RFI shielding applications - using conductive plastic (a compound of plastic and stainless steel fibers). • Electronic instrument enclosures, ideally suited for mounting printed circuit boards. • Thick wall design with an average wall thickness of .13” (3.3 mm). • Molded from a compound of stainless steel fibers and flame retardant ABS plastic (carries a UL flammability rating of 94V-0). • Designed to meet IP54. • Countersunk lid is secured with four M3 x 0.5 - 0.71” (18 mm) long, Philips machine screws threaded into...

RFI - Hand Held - (1599 RFI Series) KEY FEATURES • Designed for EMI/RFI shielding applications - using conductive plastic (a compound of plastic and stainless steel fibers). • Attractively styled and ergonomically designed for use as a “hand-held” instrument enclosure. • Molded from a compound of stainless steel fibers and flame retardant ABS plastic (carries a UL flammability rating of 94V-0). • Recessed top for membrane display or pad. • Lap joint construction provides protection against dust accumulation and splashing water. • Extra deep top and ultra shallow base are specifically...

Hand Held - Plastic Enclosures (Clipper Series) KEY FEATURES • The Clipper series is a British designed hand held enclosure (originally sold under the West Hyde Enclosures Ltd. name). • Ideally suited for mounting small printed circuit boards for use in hand held applications. • Molded in a choice of black (RAL 9005) or grey (RAL 9018) - flame retardant ABS plastic. • Satin texture finish. • Complete with top & bottom, removable front panel, battery door (except on the smallest size) and three self tapping screws. • The top panel has a flat display area, perfect for labels, silk screening,...

Plastic Bench Case Enclosures (1210 Series) KEY FEATURES • The Bench Case is a British designed plastic enclosure. • Ideally suited for mounting printed circuit boards for use in bench top applications. • Molded in a choice of black (RAL 9005) or grey (RAL 9018) - flame retardant ABS plastic. • Satin texture finish. • Complete with plastic top & bottom, removable aluminum front panel, four rubber self adhesive feet and four self tapping screws. • The top panel & bottom halves include a flat display area, perfect for labels or silk screening. • The base is molded with six bosses for easy...

Panel Mounted DIN Enclosures (1212-1216 Series) KEY FEATURES • Perfect for enclosing instruments or P.C. boards that need to be panel mounted. • Molded in black (RAL 9005) flame retardant ABS plastic. • Conforms with DIN 43700. • Molded guides for two horizontally mounted P.C. boards (1.6 mm thick). • Includes two front panels - choose between natural aluminum panel or grey tinted acrylic filter panel. • Complete with plastic bezel and two metal panel mounting clamps with screws. Part Number Guelph, Ontario (519) 822-2960 St. Laurent, Quebec (514) 343-9010

Two Piece - Fixed Panel Plastic Enclosures (MB) • Rugged electronic instrument enclosures, ideally suited for mounting printed circuit boards for hand-held, desktop or wall mount applications. • Molded in polystyrene plastic. • Designed to meet IP54. • Assembled with four M3 x 0.5” (13 mm) Philips machine screws (included) threaded into integral brass bushings. Perfect for applications where repetitive assembly and disassembly are required. Screws are hidden in a recess in the base. • Includes four self tapping screws for internal standoffs. • Lid is a smooth light grey (RAL 7035) and the...