*mydirectindustry

Catalogs
Hammond
Outlet Strips & Line Transformers

Outlet Strips & Line Transformers

1 / 48 PagesView full catalog

Outlet Strips & Line Transformers

Product catalog summary

Outlet Strips Overview

15 Amp - Industrial/Commercial Grade: Designed for rugged use with metal housing and heavy-duty receptacles, featuring a 14-gauge wire cord, NEMA plug types, and a resettable circuit breaker. Certified by CSA and UL.
15 Amp (90° Offset): Similar to the standard 15 Amp but with receptacles turned 90° for wall transformers, maintaining the same certifications and features.
15 Amp with "Green Dot" Plug & Receptacles: Intended for institutional use, featuring low leakage and impact resistance, but not suitable for critical care environments.
20 Amp - Industrial/Commercial Grade: Built for heavy-duty use with a 12-gauge power cord and 20A receptacles, including a circuit breaker, CSA and UL certified.

Rack Mount Outlet Strips

15 Amp - Rack Panel Mount: Available with front or rear mounted receptacles, designed for rack installations.
20 Amp - Rack Panel Mount: Similar to the 15 Amp version but supports higher current loads.

Outlet Strips with Surge Protection

ZAP Traps and Surge Check: Offer surge protection for sensitive equipment.
15 Amp with Surge Protection: Available in both standard and rack mount configurations.

Line Transformers

Selection Guide: Includes various types of isolation and step-up/step-down transformers for different applications.

Accessories

Includes single receptacles, circuit breakers, switches, indicator lights, and various power cords.

Specifications:

Units feature a 0.37” high red LED ammeter with an accuracy of +/- 0.1 Amps.
Available with lighted on/off switch or red pilot light for power indication.
15 Amp series uses 14 gauge wire cords with NEMA 5-15P plugs, while 20 Amp series uses 12 gauge wire cords with NEMA 5-20P or L5-20P plugs.
Includes a 15 or 20 Amp, 125 VAC circuit breaker to prevent overload.
Two outlets are spaced for plug-in transformers.
Panel dimensions are 1.75” high (1U) and 19” rack width.
cURus recognized to UL1363 & CSA C22.2 No. 21-95 standards.

Product Variants:

Various models are available with different cord lengths, plug types, and configurations (e.g., with or without ammeter, lighted switch, or pilot light).
Models are available in natural aluminum or black powder coat finishes.

Installation and Usage:

Designed for mounting to rack cabinets or open relay racks using included hardware.
Outlet strips cannot be used between front and rear panel rails of rack cabinets due to interference issues.
Surge protected models are available in the 1585, 1586, 1587 & 1588 “S” series.

Compliance and Safety:

Products are CSA certified and UL listed, ensuring compliance with safety standards.
Heavy-duty construction suitable for extreme temperature ranges.

Line Transformers Overview: This document provides detailed specifications and features of various line transformers manufactured by Hammond Manufacturing. These transformers are designed for different applications, including isolation, step-up, step-down, and constant voltage regulation. They are primarily used for circuit isolation and voltage conversion in various electrical systems.

Specifications:

North American Safety Certification: All units are C UL & UL listed (File #E211544).
Line Frequency: These units do not convert line frequency.

Product Categories:

Plug-In Transformers: These include Toroidal Isolation, Constant Voltage, and Autotransformers for both step-up and step-down applications. They are available in various capacities ranging from 100 VA to 2000 VA.
Hard Wired Autotransformers: Designed for applications where equipment is already isolated, these transformers provide voltage change without isolation. They are suitable for both step-up and step-down operations.

Key Features:

Toroidal Transformers: Known for high isolation, low noise, lightweight, cool operation, and low profile.
Constant Voltage Regulators: Protect against brownouts and over-voltage conditions, with features like ferroresonant design for long life and noise isolation.
Autotransformers: Single winding units that do not provide isolation, used for voltage change only.

Applications:

Worldwide applications with 50 or 60 Hz operation.
Suitable for use with international power sources using grounded adaptor plugs.

Additional Information:

Units are equipped with standard North American plugs and receptacles.
Features include ventilated steel cases, lighted on-off switches, and circuit breaker protection.
Some units are not suitable for office environments due to audible noise.

Product Overview:
This document provides a detailed list of electrical accessories offered by Hammond Manufacturing. The accessories include single receptacles, circuit breakers, rocker switches, indicator lights, and various types of power cords with different plug configurations and amperage ratings.

Specifications:

Single Receptacles: Available in 15A and 20A with 125 VAC.
Circuit Breakers: Available in 15A and 20A with 125 VAC.
Rocker Switches: Lighted and non-lighted options available in 15A and 20A with 125 VAC.
Indicator Lights: Operate at 125 VAC.
Power Cords: Various configurations including straight blade and locking molded plugs, available in 15 Amp (14/3) and 20 Amp (12/3) with cord lengths of 6.5’ and 15.5’.

Mounting Accessories:

Mounting Clips: Steel clips for mounting to rack cabinet struts, relay rack uprights, or work benches. Part No. 1585CLIP.
Vertical Mounting Clips: For vertical mounting of outlet strips in rack cabinets. Part No. 1584MK1.

Contact Information:
Contact details for Hammond Manufacturing offices in the USA, Canada, Europe, Australia, and Asia are provided for customer support and inquiries.

Catalog excerpts

Outlet Strips Rack Mount Outlet Strips Outlet Strips with Surge Protection Line Transformers

Open the catalog to page 2

Outlet Strips Outlet Strips

Open the catalog to page 3

15 Amp - Industrial/Commercial Grade 1584 Series Key Features Outlet Strips • Built to meet the rugged requirements of commercial and industrial use. • All metal housing - tough extruded aluminum case with a black powder paint coated steel cover. • Heavy duty receptacles. • Heavy 14 gauge wire cord - 14/3 SJT or SJTW for extreme temperature ranges and integral molded plug. • Plug types available are NEMA 5-15P straight blade or NEMA L5-15P locking plug (see table below). • Mounting feet (with keyhole slots) allow temporary work station mounting if desired. • On-Off switch is rocker type with...

Open the catalog to page 4

15 Amp (90° Offset) - Industrial/Commercial Grade 1584 “RA” Series Key Features Plug Type Straight Straight Locking Plug Locking Plug Straight Straight Locking Plug Locking Plug Straight Straight Locking Plug Locking Plug Straight Straight Locking Plug Locking Plug Outlet Strips • Receptacles turned 90° to allow space for wall transformers • 4 outlet receptacles are spaced 2.3” apart, 6 outlet receptacles are spaced 2.1” apart (center to center) • Built to meet the rugged requirements of commercial and industrial use. • All metal housing - tough extruded aluminum case with a black powder paint...

Open the catalog to page 5

15 Amp - With “Green Dot” Plug & Receptacles 1584 “H” Series Outlet Strips Key Features • • • • • • • • • • • • Featuring a sturdy aluminum extruded case with a distinctive black powder paint coated steel cover. Designed to meet the special requirements for institutional and chronic care use. NOT FOR USE IN CRITICAL CARE ENVIRONMENTS With “Green Dot” white receptacles, line cord and plug. Exceeds NEMA requirements for low leakage ground return and for withstanding impact or continuous physical shock without loss of grounding path continuity when plugged into properly grounded source receptacles....

Open the catalog to page 6

20 Amp - Industrial/Commercial Grade 1589 Series Outlet Strips Built to meet the rugged requirements of industrial and commercial use. All metal housing – tough extruded aluminum case with black powder-coated steel cover. Heavy-duty black receptacles rated for 20A, 125VAC service (NEMA 5-20R, Single T-Slot). Heavy-duty power cord – 12/3 SJT or SJTW for extreme temperature ranges. Integral molded plug with straight blade (NEMA 5-20P) or locking plug (NEMA L5-20P) configuration. Available with on/off switch or red pilot light to indicate power on (see table). Includes 20A, 125VAC circuit breaker...

Open the catalog to page 7

International (IEC) - Industrial/Commercial Grade 1581 Series Outlet Strips Key Features • Designed for use with IEC power cords • All metal housing – tough extruded aluminum case with black powder-coated steel cover • One IEC 320 - C14 inlet, and 4, 5, 6 or 8 IEC 320 - C13 outlets • On-Off switch is rocker type with green light (on those units with on-off switch - listed below) or a green pilot light to indicate power on. • Mounting feet (with keyhole slots) allow temporary work station mounting if desired. • Includes 10A, 230VAC circuit breaker to prevent accidental line overload • cULus listed,...

Open the catalog to page 8

15 Amp - Power Blocks 1580 Series Key Features • • • • • • • • Designed for power distribution in a compact area. Available with a single on/off switch, no switch or individually switched receptacles Heavy 14 gauge wire cord - 14/3 SJT or SJTW for extreme temperature ranges and integral molded plug. Plug type available is NEMA 5-15P straight blade. Includes 15 Amp, 125 VAC circuit breaker to prevent accidental overload. Mounting feet (with keyhole slots) allow temporary work station mounting if desired. CSA certified, Standards C22.2 (No. 21-95 and No. 42-99) UL listed, Standard UL1363 Outlet...

Open the catalog to page 9

Basic Plastic Outlet Strip P0801 Series Basic power bar - no surge protection. Economical design. Moulded in UL VO grade flame retardant plastic case. 3’ long, heavy 14 gauge wire cord - integral molded plug. 15 Amp circuit breaker and lighted on/off switch. Rated 15 amps, 115 volt. CSA certified UL listed.

Open the catalog to page 10

Rack Mount Outlet Strips Rack Mount Outlet Strips

Open the catalog to page 11

15 Amp - Rack Panel Mount (Front Mounted Receptacles) 1582 Series Rack Mount Outlet Strips 12 Designed for power distribution from the front of the unit Available with lighted on/off switch or red pilot light to indicate power on(see tables below). Available in ASA 61 grey or black powder coat finish. Heavy 14 gauge wire cord - 14/3 SJT or SJTW for extreme temperature ranges and integral molded plug. Plug types available are NEMA 5-15P straight blade or NEMA L5-15P locking plug. Includes 15 Amp, 125 VAC circuit breaker to prevent accidental overload. 6 outlet models include 2 outlets with extra...

Open the catalog to page 12

15 Amp - Rack Panel Mount (Rear Mounted Receptacles) 1583 Series Designed for power distribution from the rear of the unit. With lighted on/off switch or red pilot light (see tables below) to indicate power on. Available in ASA 61 grey or black powder coat finish. Heavy 14 gauge wire cord - 14/3 SJT or SJTW for extreme temperature ranges and integral molded plug. Plug types available are NEMA 5-15P straight blade or NEMA L5-15P locking plug (see table & pictures below). Includes 15 Amp, 125 VAC circuit breaker to prevent accidental overload. 6 outlet models include 2 outlets with extra spacing...

Open the catalog to page 13

15 Amp - Rack Panel Mount 1583 “X” Series Front View Rack Mount Outlet Strips Rear View Designed for power distribution from both the front and rear of the unit. Available with lighted on/off switch or red pilot light to indicate power on. Available in black powder coat finish. Heavy 14 gauge wire cord - 14/3 SJT or SJTW for extreme temperature ranges and integral molded plug. Plug types available are NEMA 5-15P straight blade or NEMA L5-15P locking plug (see table below). Includes 15 Amp, 125 VAC circuit breaker to prevent accidental overload. Panel dimensions are 1.75” high (1U) and 19” rack...

Open the catalog to page 14

Outlet Strips & Line Transformers

Outlet Strips & Line Transformers

Catalog excerpts

All Hammond catalogs and technical brochures