*mydirectindustry

Catalogs
Hammond
Industrial Enclosures

Industrial Enclosures

Product catalog summary

Overview: The document provides comprehensive specifications and descriptions of industrial enclosures manufactured by Hammond Manufacturing. These enclosures are designed to protect electrical and electronic equipment in harsh industrial environments, offering protection against environmental factors such as dirt, dust, oil, and water.

Eclipse Junior Series: These single-door enclosures comply with NEMA 4, 12, and 13 standards, featuring a 16-gauge steel body, stainless steel hinges, and a seamless gasket for protection against liquids and contaminants. Accessories include inner panels, breather kits, and filter fans.

1414 Series Enclosures: Compliant with NEMA 12 and 13 standards, these enclosures have a clamped, lift-off cover and are constructed from 16 or 14-gauge steel, providing protection from dirt, dust, oil, and water. Accessories include additional inner panels and door clamping hardware.

1414 N4 Series Enclosures: Similar to the 1414 Series but also compliant with NEMA 4 standards, these enclosures offer protection in wet environments and outdoor applications, featuring a lift-off cover secured with stainless steel clamps and screws.

Construction and Standards: All enclosures are constructed with smooth, continuously welded seams and finished in ANSI 61 gray powder coating. They comply with various UL, CSA, and IEC standards, ensuring high levels of protection and durability.

Accessories: A wide range of accessories is available, including breather kits, filter fans, thermostats, and terminal kit assemblies, enhancing the functionality and adaptability of the enclosures.

Specifications: Enclosures are made from 14 or 16 gauge steel with smooth, continuously welded seams. They feature a continuous hinged cover secured with stainless steel clamps and screws, and a seamless poured-in-place gasket for enhanced protection. Models larger than 4" x 4" include a removable 14 gauge inner panel.

Finish: Enclosures and covers are phosphatized and finished in ANSI 61 gray recoatable powder coating, with removable inner panels finished in white powder coating.

Standards: Complies with UL 508 Type 3R, 4, 12, and 13, CSA Type 3R, 4, 12, and 13, NEMA Type 3R, 4, 12, and 13, and IEC 60529, IP66.

Applications: Suitable for use as instrument enclosures, electric, hydraulic, or pneumatic control housings, electrical junction boxes, or terminal wiring enclosures, providing protection in environments where equipment may be exposed to water or outdoor conditions.

Product Variants: Detailed tables list different models of enclosures, specifying dimensions, part numbers, and shipping weights for each variant.

1418J Series - NEMA 12: Includes various models with different dimensions and weights, made from formed steel with smooth, welded seams, designed to exclude liquids and contaminants. Features include door stiffeners, removable doors, and a seamless gasket for sealing.

Eclipse Series - NEMA 4, 12: Designed for wallmount applications, these enclosures protect equipment while allowing for component viewing through a polycarbonate window. Complies with UL 508 Type 3R, 4, and 12, CSA Type 3R, 4, and 12, NEMA 3R, 4, and 12, and IEC 60529, IP66.

Key Data from Tables: Tables provide part numbers, dimensions, weight, and other specifications for different models within the series.

Conclusion: Hammond Manufacturing offers a comprehensive range of industrial enclosures designed to meet various protection standards and application needs, with detailed specifications and available accessories making them suitable for a wide range of industrial applications.

Catalog excerpts

www.hammondmfg.com Industrial Enclosures Industrial Enclosures Quality Products. Service Excellence. © Hammond Manufacturing Data Subject to change without notice

Open the catalog to page 1

Industrial Enclosures Quality Products. Service Excellence. © Hammond Manufacturing Data Subject to change without notice

Open the catalog to page 2

www.hammondmfg.com Eclipse Junior Series - NEMA 4, 12, 13 Single Door Enclosures Industrial Enclosures Junction Boxes • Designed to enclose electrical and/or electronic equipment and protect against harsh, industrial environments. • For use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures. • Impressive styling features make the Eclipse Junior a suitable addition to any high-tech equipment installation. • Body and cover are formed from 16 gauge steel. • Smooth, continuously welded seams without knockouts, cutouts,...

Open the catalog to page 3

Eclipse Junior Series - NEMA 4,12,13 Single Door Enclosures Hinge Side View Latch Side View Front View Overall Dimensions Panel Size Technical references and CAD downloads available at www.hammondmfg.com All dimensions in inches unless specified otherwise Quality Products. Service Excellence. © Hammond Manufacturing Canada: 519.822.2960 or 905.456.3770 USA: 716.630.7030 Data Subject to change without notice

Open the catalog to page 4

www.hammondmfg.com 1414 Series Enclosures - NEMA 12, 13 Clamped, Lift Off Cover Industrial Enclosures Junction Boxes • Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures. • Provides a degree of protection from falling dirt, dust, oil and water. • Body formed from 16 gauge or 14 gauge steel. Covers are formed from 14 gauge steel. • Smooth, continuously welded seams without knockouts, cutouts or holes. • Welded brackets provide for enclosure mounting. • Lift off cover is secured with stainless steel...

Open the catalog to page 5

Clamped, Lift Off Cover TAPPED STUD Front View OUTSIDE COVER DIMENSION- Side View View showing clamp location when one clamp is used GROUND STUD LOCATION GROUND STUD Bottom View View showing clamp location when two clamps are used Dimensions Panel Size Centers Cover Ship Wt. Part No. ABCDEFGHJ LN Dimensions P T V Y Z Lbs. 1 Does not meet JIC requirements Technical references and CAD downloads available at www.hammondmfg.com All dimensions in inches unless specified otherwise ) Hammond Manufacturing Quality Products. Service Excellence. Data Subject to change without notice

Open the catalog to page 6

www.hammondmfg.com 1414 N4 Series Enclosures - NEMA 4, 12, 13 Clamped, Lift Off Cover Industrial Enclosures Junction Boxes • Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures. • Provides protection where equipment may be hosed down or otherwise be very wet, or in outdoor applications for full weather protection. • Body formed from 16 or 14 gauge steel. Covers are formed from 14 gauge steel. • Smooth, continuously welded seams without knockouts, cutouts or holes. • Welded brackets provide for enclosure...

Open the catalog to page 7

1414 N4 Series Enclosures - NEMA 4,12,13 Clamped, Lift Off Cover SEE MOUNTING FOOT DETAIL Side View Front View OUTSIDE COVER DIMENSION STUD LOCATION GROUND STUD Ground stud location for 1414N4A Bottom View Mounting Detail When B= 4 Panel Dimensions Technical references and CAD downloads available at www.hammondmfg.com All dimensions in inches unless specified otherwise ) Hammond Manufacturing Quality Products. Service Excellence. Data Subject to change without notice

Open the catalog to page 8

www.hammondmfg.com 1414 PH Series Enclosures - NEMA 12, 13 Continuous Hinge, Clamped Cover Industrial Enclosures Junction Boxes • Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures. • Provides a degree of protection from falling dirt, dust, oil and water. • Body formed from 16 gauge or 14 gauge steel. Covers are formed from 14 gauge steel. • Smooth, continuously welded seams without knockouts, cutouts or holes. • Welded brackets provide for enclosure mounting. • Continuously hinged cover is secured...

Open the catalog to page 9

www.hammondmfg.com 1414 PH Series Enclosures - NEMA 12, 13 Continuous Hinge, Clamped Cover Industrial Enclosures Part No. Without Inner Panel Technical references and CAD downloads available at www.hammondmfg.com All dimensions in inches unless specied otherwise Quality Products. Service Excellence. © Hammond Manufacturing Junction Boxes Cover Dimensions Data Subject to change without notice

Open the catalog to page 10

www.hammondmfg.com 1414 N4 PH Series Enclosures - NEMA 4, 12, 13 Continuous Hinge, Clamped Cover Industrial Enclosures Junction Boxes • Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures. • Provides protection where equipment may be hosed down or otherwise be very wet, or in outdoor applications for full weather protection. • Body formed from 16 or 14 gauge steel. Covers are formed from 14 gauge steel. • Smooth, continuously welded seams without knockouts, cutouts or holes. • Welded brackets provide...

Open the catalog to page 11

1414 N4 PH Series Enclosures - NEMA 4,12,13 Continuous Hinge, Clamped Cover SEE MOUNTING FOOT DETAIL Front View Side View MOUNTING FOOT Mounting Foot Detail GROUND STUD Ground stud location Part No. Panel Ship Ship wt. without Dimensions over wt. with w/o Part No. Inner Panel ABC D EFGHJL Ulmensl0ns T V Y Panel Panel 1 Does not meet JIC requirements Technical references and CAD downloads available at www.hammondmfg.com All dimensions in inches unless specified otherwise ) Hammond Manufacturing Quality Products. Service Excellence. Data Subject to change without notice

Open the catalog to page 12

www.hammondmfg.com 1414 SC Series Enclosures - NEMA 12, 13 Lift Off, Screw Cover Industrial Enclosures Junction Boxes • Designed for use as instrument enclosures, electric, hydraulic or pneumatic control housings, electrical junction boxes or terminal wiring enclosures. • Provides a degree of protection from falling dirt, dust, oil and water. • Body formed from 16 gauge or 14 gauge steel. Covers are formed from 14 gauge steel. • Smooth, continuously welded seams without knockouts, cutouts or holes. • Welded brackets provide for enclosure mounting. • Cover is secured with captive, plated steel...

Open the catalog to page 13

Industrial Enclosures

Industrial Enclosures

Catalog excerpts

All Hammond catalogs and technical brochures