Type 4 Two Door Freestanding Enclosure (HN4 FSTD Series) - Hammond Mfg. Quality Products. Service Excellence. Type 4 Two Door Freestanding Enclosure HN4 FSTD Series Continuous Hinge Door with Handle Application Designed to house electrical, electronic, hydraulic or pneumatic controls and instruments. Provides protection where equipment may be hosed down or otherwise be very wet, or in specific applications. Construction Formed 12 gauge steel. Smooth, continuously welded seams without knockouts, cutouts or holes. Heavy duty stainless steel lifting eyebolts are provided with reinforcing support angles. Doors are supported with heavy gauge continuous hinges. Dual Access versions have doors front and back. 3-pt padlocking door handle. Seamless poured-in place gasket. A grounding stud is provided in the enclosure and a bonding stud is provided on the door. Center post is removable for easy installation of the inner panel. Standards UL 508A Type 3R, 4 and 12 CSA Type 3R, 4 and 12 Complies with: NEMA Type 3R, 4, 12 and 13 IEC 60529, IP66 Finish Cover and enclosure are finished in recoatable smooth ANSI 61 gray powder coating. Optional inner panels are available in white powder coating, or unpainted galvanized steel. Accessories Inner Panels Panel Rails Door Stop Kit Drip Shield Kit Window Kits Center Panel Supports Swing Out Frames Top Hat Cable Modules Type 12/4, 4X Handle Kits Climate Control General Accessories Single Access Enclosure H Full Panel¹

Type 4 Two Door Freestanding Enclosure (HN4 FSTD Series) - Hammond Mfg. Enclosure Optional Full Panel¹ ¹ Refers to optional full height/full width panels. Depth panels/half height width panels are also available Dual Access Enclosure H Full Panel¹ ¹ Refers to optional full height/full width panels. Depth panels/half height width panels are also available Data subject to change without notice © 2021. Hammond Manufacturing Ltd. All rights reserved.