Type 4X Stainless Steel Two Door Freestanding Enclosure (HN4 FSTD SS Series) - Hammond Mfg. Quality Products. Service Excellence. Type 4X Stainless Steel Two Door Freestanding Enclosure HN4 FSTD SS Series Continuous Hinge Door with Handle Application Designed to house electrical, electronic, hydraulic or pneumatic controls and instruments. Provides protection where equipment may be hosed down or otherwise be very wet, or in specific applications where corrosion is a serious problem. Construction Formed 12 gauge 304 stainless steel. Smooth, continuously welded seams without knockouts, cutouts or holes. Heavy duty stainless steel lifting eyebolts are provided with reinforcing support angles. Doors are supported with heavy gauge continuous hinges. Dual Access versions have doors front and back. 3-pt padlocking door handle. Seamless poured-in place gasket. A grounding stud is provided in the enclosure and a bonding stud is provided on the door. Center post is removable for easy installation of the inner panel. Standards UL 508A Type 3R, 4X and 12 CSA Type 3R, 4X and 12 Complies with: NEMA Type 3R, 4X, 12 and 13 IEC 60529, IP66 Finish Cover and enclosure are natural stainless steel with a smooth brushed finish. Accessories Inner Panels Panel Rails Center Panel Supports Swing Out Frames Door Stop Kit Drip Shield Kit Window Kits Lighting Top Hat Cable Modules Type 12/4, 4X Handle Kits Climate Control General Accessories Single Access Enclosure H Full Panel¹

Type 4X Stainless Steel Two Door Freestanding Enclosure (HN4 FSTD SS Series) - Hammond Mfg. Enclosure Optional Full Panel¹ ¹ Refers to optional full height/full width panels. Depth panels/half height width panels are also available Dual Access Enclosure H Full Panel¹ ¹ Refers to optional full height/full width panels. Depth panels/half height width panels are also available Data subject to change without notice © 2021. Hammond Manufacturing Ltd. All rights reserved.