HMW 7.8 PHT-ST

1 / 1 PageView full catalog

HMW 7.8 PHT-ST

Product catalog summary

Specifications

Max Pulling Capacity: 7800 kg (17196 lbs)
Max Rope Length: 43 m (141 ft)
Recommended Wire Rope: 14 mm (5/9”) 1960 Mpa
Max Working Pressure: 208 bar (3016 psi)
Max Pump Flow: 75 L/min (19.8 g/min)
Gear Ratio: 5.2:1
Oil Type and Capacity: 85W 90 - 0.9 L
Winch Weight: 102 kg (224.8 lbs)

Standards and Features

Cable Tensioner
Roller Fairlead
Manual Clutch
Hydraulic Inlets: G 1/2’’
Optional Air Clutch
IP67 - IP68
Hydraulic Motor: 400 cc (24 in³)
Roller Fairlead Weight: 11 kg (24.2 lbs)
Cable Tensioner Weight: 4.5 kg (9.9 lbs)
Mounting Bolts: 16 pieces M12

Performance

Rope Winding Layers:
- 8.4 m / 27.5 ft
- 18.3 m / 60 ft
- 29.8 m / 97.7 ft
- 43 m / 141 ft
Pulling Capacity:
- 7800 kg / 17196 lbs
- 6487 kg / 14299 lbs
- 5552 kg / 12238 lbs
- 4853 kg / 10696 lbs
Rope Speed:
- 13 m/min - 42.6 ft/min
- 15.5 m/min - 50.8 ft/min
- 18 m/min - 59 ft/min
- 20.7 m/min - 68 ft/min

Design and Safety

Extra reinforced steel cast body through heat treatment
Light and robust design
100% Holding negative-acting hydraulic brake system
Standard Pressure Roller and Roller Fairlead
Easy assembly, high rope capacity, and high torque hydromotor
Standard manual rope unloading system
Meets SAE J706 rating
CE Machinery Directive 2006/42/EC

Warnings

Before operating, A-B lines must be open to T line (tank line) of the control valve in center position.
This winch is designed for pulling, not for lifting persons or materials.
Always keep the last 5 wraps on the drum.
Technical details are subject to change by HAMMER WINCH.
Pneumatic working pressure: Min 9 bar - Max 12 bar (Min 130 psi - Max 174 psi)

Catalog excerpts

Extra reinforced steel cast body through the heat treatment and industrial design Light and robust design 100% Holding negative-acting hydraulic brake system. Standard Pressure Roller and Roller Fairlead. Easy assembly, high rope capacity and high torque hydromotor Standard manual rope unloading system CE Machinery Directive 2006/42/EC Meets SAE J706 rating Specifications Max.pulling capacity (kg / Ibs) Recommended wire rope (mm / in) : 14 mm ( 5/9” ) 1960 Mpa Hydraulic Motor (cc / in³) Gear ratio Rope Winding Layer Rope Speed Winch : (kg / Ibs ) 102 kg ( 224.8 Ibs ) Roller Fairlead : ( kg / lbs ) 11 kg (24,2 lbs) Cable Tensioner : ( kg / Ibs ) 4,5 kg (9,9 lbs) Mounting Bolts 16 pieces M12 Standards Cable tensioner Roller Fairlead Manual Clutch Optional Air Clutch IP67 - IP 68 Hydraulic Inlets G 1/2’’ Warning ! Before operating the winch, A-B lines must be open to T line (tank line) of the control valve in center position. This winch is designed and manufactured for pulling, don’t lift person or material. Always keep last 5 wrap on the drum. The tecnical details given above are just for information. HAMMER WINCH keeps the right to change the tecnical details. Pneumatic working pressure: Min 9 bar - Max 12 bar (Min 130 psi - Max 174 psi) Manual Clutch

Open the catalog to page 1

HMW 7.8 PHT-ST

HMW 7.8 PHT-ST

Catalog excerpts

All Hammer Winch catalogs and technical brochures