HMW 6.8 PHT-ST

1 / 1 PageView full catalog

HMW 6.8 PHT-ST

Product catalog summary

Specifications

Max pulling capacity: 6800 kg (14987 lbs)
Model: 6.8 PHT-ST
Standard: SAE J706
Max rope length: 43 m (141 ft)
Recommended wire rope: 14 mm (5/9”) 1960 Mpa
Max working pressure: 190 bar (2755 psi)
Max pump flow: 60 L/min (15.8 g/min)
Gear ratio: 5.2:1
Oil type and capacity: 85W 90 - 0.9 L
Winch weight: 102 kg (224.8 lbs)

Standards and Features

Cable tensioner
Roller Fairlead
Manual Clutch
Hydraulic Inlets: G 1/2’’
Optional Air Clutch
IP67 - IP68 rating
Hydraulic Motor: 400 cc (24 in³)
Roller Fairlead weight: 9 kg
Cable Tensioner weight: 4 kg (9 lbs)
Mounting Bolts: 16 pieces M12

Performance

Rope Winding Layer	Pulling Capacity (kg/lbs)	Rope Speed (m/min - ft/min)	Rope Length (m/ft)
1	6800 kg / 14987 lbs	10 m/min - 33 ft/min	8.4 m / 27.5 ft
2	5655 kg / 12464 lbs	12.4 m/min - 40.6 ft/min	18.3 m / 60 ft
3	4840 kg / 10667 lbs	14.5 m/min - 47.5 ft/min	29.8 m / 97.7 ft
4	4230 kg / 9324 lbs	16.6 m/min - 54.4 ft/min	43 m / 141 ft

Design and Safety

Extra reinforced steel cast body with heat treatment
Light and robust design
100% Holding negative-acting hydraulic brake system
Standard pressure roller and roller fairlead
Easy assembly, high rope capacity, and high torque hydromotor
Standard manual rope unloading system
Meets SAE J706 rating and CE Machinery Directive 2006/42/EC

Warnings

Before operating, A-B lines must be open to T line (tank line) of the control valve in center position.
Designed for pulling only, not for lifting persons or materials.
Always keep the last 5 wraps on the drum.
Technical details are subject to change by HAMMER WINCH.
Pneumatic Working Pressure: Min 9 bar - Max 12 bar (Min 130 psi - Max 174 psi)

Catalog excerpts

Extra reinforced steel cast body through the heat treatment and industrial design. Light and robust design. 100% Holding negative-acting hydraulic brake system. Standard pressure roller and roller fairlead. Easy assembly, high rope capacity and high torque hydromotor Standard manual rope unloading system CE Machinery Directive 2006/42/EC Meets SAE J706 rating Specifications Max.pulling capacity (kg / Ibs) Rope Winding Layer Rope Speed Recommended wire rope (mm / in) : 14 mm ( 5/9” ) 1960 Mpa Hydraulic Motor (cc / in³) Gear ratio Winch : (kg / Ibs ) 102 kg (224.8 Ibs) Roller Fairlead : ( kg / lbs ) 9 kg ( lbs) Standards Cable tensioner Roller Fairlead Manual Clutch Mounting Bolts Hydraulic Inlets Warning ! Before operating the winch, A-B lines must be open to T line (tank line) of the control valve in center position. This winch is designed and manufactured for pulling, don’t lift person or material. Always keep last 5 wrap on the drum. The tecnical details given above are just for information. HAMMER WINCH keeps the right to change the tecnical details. Pneumatic Working Pressure: Min 9bar - Max 12 bar (Min 130 psi - Max 174 psi) Manual Clutch

Open the catalog to page 1

HMW 6.8 PHT-ST

HMW 6.8 PHT-ST

Catalog excerpts

All Hammer Winch catalogs and technical brochures