Extra reinforced steel cast body. Lightweight and strong design. 100% Holding negative-acting hydraulic brake system. Standard pressure roller and roller fairlead. Easy assembly, high rope capacity and high torque hydromotor. Standard manual rope unloading system. CE Machinery Directive 2006/42/EC Meets SAE J706 rating Specifications Max.pulling capacity Max.rope length Rope Winding Layer Rope Speed No-load fast winding m /min 27339 kg / 60257 Ibs 3.3 m/min - 10.8 ft/min 43.5 m / 142,6 ft 24.5 m/min - 80.4 ft/min Recommended wire rope : 28 mm ( 10/9" ) 2160 Mpa Hydromotor Gear ratio Winch : (kg / Ibs ) 755.8 kg ( 1665.8 Ibs ) Roller Fairlead : ( kg / lbs ) 50 kg ( 110.2 lbs ) 24176 kg / 53285 Ibs 3.7 m/min - 12.1 ft/min 59.5 m / 195.3 ft 27.8 m/min - 91 ft/min 21669 kg / 47760 Ibs 4.1 m/min - 13.4 ft/min Cable Tensioner : ( kg / Ibs ) 12 kg ( 26.4 lbs Mounting Bolts : ( kg / Ibs ) 20 pieces M22 8,8 Standards Cable tensioner Roller Fairlead Warning ! Before operating the winch, A-B lines must be open to T line (tank line) of the control valve in center position. This winch is designed and manufactured for pulling, don’t lift person or material. Always keep last 5 wrap on the drum. The tecnical details given above are just for information. HAMMER WINCH keeps the right to change the tecnical details. Pneumatic working pressure : Min 9 bar - Max 12 bar (Min130 psi - Max 174 psi) Do not pull a load in fast rope winding mode as the brake system is not activated! Activating or deactivating the high speed winding/unwinding mode pneumatically. Activating or deactivating the high speed winding/unwinding mode manua