HMW 6.8 PHT - CE Extra reinforced aluminium cast body through the heat treatment and industrial design • Light and powerful design • %100 Holding Negative-Acting Hydraulic brake system. • Standard Pressure Roller and Roller Failead. • Easy assembly, High rope capacity and High torque hydromotor • Standard manual rope unloading system Specifications Max.pulling capacity (kg / lbs) Max.rope length (mt / ft) Recommended wire rope (mm / in) Hydromotor (cc / in3) : Max. pump flow (l / min - gal / min) Gear ratio: Oil types and capactiy Max. working pressure (bar / psi) Winch : (kg / Ibs ) 74 kg (162,8 Ibs) Roller Fairlead : ( kg / lbs ) 11 kg (24,2 lbs) Cable Tensioner 4,5 kg (9,9 lbs) Mounting Bolts 16 pieces M12 HMW 6.8 PHT/P Air Clutch HMW 6.8 PHT Manual Clutch Warning!! Before operate the winch, A-B lines must be open to Tline (tank line) of the control valve in center position. This winch is desingd and manufactured for pulling, don't lift person or metarial. Always keep last5 wrap on the drum. The tecnical details given above just for infarmation.HAMMER WlNCH keeps the to change the tecnical. details Pneumatic Working Pressure: Min - Max 9 - 12 bar (130 - 174 psi) Standards Cable tensioner Roller Fairlead Optinal Air Clutch IP67 - IP 68 Hydraulic Inlets G 1/2’’