5.8 PHT - CE

Product catalog summary

Specifications
The HMW 5.8 PHT/P Air Clutch and Manual Clutch have a maximum pulling capacity of 5800 kg (12773 lbs). The maximum rope length is 60 meters (198 feet), and the recommended wire rope diameter is 12 mm (1/2 inch). The maximum working pressure is 175 bar (2537 psi), with a maximum pump flow of 60 liters per minute (15.8 gallons per minute). The gear ratio is 5.2:1, and the oil type required is 85W 90 with a capacity of 0.9 liters. The winch itself weighs 61 kg (134 lbs).

Standards and Options
The winch includes a cable tensioner, roller fairlead, and hydraulic inlets of G 1/2''. Optional features include an air clutch and IP67 - IP68 protection. The hydromotor has a capacity of 400 cc (24 in³), and the roller fairlead weighs 8.5 kg (19 lbs). The cable tensioner weighs 4 kg (9 lbs), and 16 pieces of M12 mounting bolts are required.

Performance
The winch's performance varies with rope winding layers, with pulling capacities ranging from 5800 kg (12783 lbs) to 3395 kg (7483 lbs) and rope speeds from 10 m/min (33 ft/min) to 17 m/min (58 ft/min). The maximum rope length is 60 m (198 ft).

Design and Features
The winch features an extra reinforced aluminum cast body, a 100% holding negative-acting hydraulic brake system, and a standard pressure roller and roller fairlead. It is designed for easy assembly, high rope capacity, and high torque with a standard manual rope unloading system.

Warnings and Recommendations
Before operating the winch, ensure A-B lines are open to the T line (tank line) of the control valve in the center position. The winch is designed for pulling only and should not be used to lift people or materials. Always keep the last 5 wraps on the drum. The technical details are subject to change by HAMMER WINCH.

Air Clutch Specifications
The pneumatic working pressure for the air clutch ranges from 9 to 12 bar (130 to 174 psi).

Catalog excerpts

^ Extra reinforced aluminium cast body through the heat treatment and industrial design • Light and powerful design • %100 Holding Negative-Acting Hydraulic brake system. • Standard Pressure Roller and Roller Failead. • Easy assembly, High rope capacity and High torque hydromotor • Standard manual rope unloading system Specifications Max.pulling capacity (kg / Ibs) Max.rope length (mt / ft) Recommended wire rope (mm / in) Hydromotor (cc / in3) : Max. pump flow (l / min - gal / min) Gear ratio: Oil types and capactiy Max. working pressure (bar / psi) Winch : (kg / Ibs ) 61 kg (134 Ibs) Roller Fairlead : ( kg / lbs ) 8.5 kg (19 lbs) Cable Tensioner 4 kg (9 lbs) Mounting Bolts 16 pieces M12 HMW 5.8 PHT/P Air Clutch HMW 5.8 PHT Manual Clutch : 5800 kg (12773 Ibs) Standards Cable tensioner Roller Fairlead Optinal Air Clutch IP67 - IP 68 Hydraulic Inlets G 1/2’’ Warning!! ■ Before operate the winch, A-B lines must be open to Tline (tank line) of the control valve in center position. ■ This winch is desingd and manufactured for pulling, don't lift person or metarial. ■ Always keep last5 wrap on the drum. ■ The tecnical details given above just for infarmation.HAMMER WlNCH keeps the to change the tecnical. details ■ Pneumatic Working Pressure: Min - Max 9 - 12 bar (130 - 174 psi)

Open the catalog to page 1

5.8 PHT - CE

5.8 PHT - CE

Catalog excerpts

All Hammer Winch catalogs and technical brochures