*mydirectindustry

5.6 PHT

Product catalog summary

Specifications
The HMW 5.6 PHT/P Air Clutch and Manual Clutch have a maximum pulling capacity of 5600 kg (12773 lbs). The specifications for the 5.6 PHT model include compliance with EN 14492-1 standards, a maximum rope length of 60 meters (198 feet), and a recommended wire rope diameter of 12 mm (1/2 inch). The maximum working pressure is 175 bar (2537 psi), with a maximum pump flow of 60 liters per minute (15.8 gallons per minute). The gear ratio is 5.6:1, and the oil type required is 85W 90 with a capacity of 0.9 liters. The winch itself weighs 65 kg (143 lbs).

Standards and Options
The winch includes a cable tensioner, roller fairlead, and hydraulic inlets with G 1/2’’ specifications. Optional features include an air clutch and IP67 - IP68 protection. The hydromotor has a capacity of 400 cc (24 in³), and the roller fairlead weighs 9 kg. The cable tensioner weighs 4 kg, and the mounting requires 16 pieces of M12 bolts.

Performance
The winch's performance varies with rope winding layers, with a maximum pulling capacity of 5600 kg (12345 lbs) and a rope speed ranging from 10 to 17 meters per minute (33 to 58 feet per minute). The rope length capacity is 60 meters (198 feet).

Design and Features
The winch features an extra reinforced aluminum cast body, a 100% holding negative-acting hydraulic brake system, and a standard pressure roller and roller fairlead. It is designed for easy assembly, high rope capacity, and high torque with a hydromotor. A standard manual rope unloading system is included.

Warnings and Recommendations
Before operating the winch, ensure that A-B lines are open to the T line (tank line) of the control valve in the center position. The winch is designed for pulling only and should not be used to lift people or materials. Always keep the last 5 wraps on the drum. The technical details provided are for informational purposes, and specifications may change. The pneumatic working pressure ranges from 9 to 12 bar (130 to 174 psi).

Catalog excerpts

^ Extra reinforced aluminium cast body through the heat treatment and industrial design • Light and powerful design • %100 Holding Negative-Acting Hydraulic brake system. • Standard Pressure Roller and Roller Failead. • Easy assembly, High rope capacity and High torque hydromotor • Standard manual rope unloading system Specifications Max.pulling capacity (kg / Ibs) Max.rope length (mt / ft) Recommended wire rope (mm / in) Hydromotor (cc / in3) : Max. pump flow (l / min - gal / min) Gear ratio: Oil types and capactiy Max. working pressure (bar / psi) Winch : (kg / Ibs ) 65 kg (143 Ibs) Roller Fairlead : ( kg / lbs ) 9 kg ( lbs) Cable Tensioner 4 kg (9 lbs) Mounting Bolts 16 pieces M12 HMW 5.6 PHT/P Air Clutch HMW 5.6 PHT Manual Clutch : 5600 kg (12773 Ibs) Cable tensioner Roller Fairlead Optinal Air Clutch IP67 - IP 68 Hydraulic Inlets G 1/2’’ 1 Rope Winding Layer Warning!! ■ Before operate the winch, A-B lines must be open to Tline (tank line) of the control valve in center position. ■ This winch is desingd and manufactured for pulling, don't lift person or metarial. ■ Always keep last5 wrap on the drum. ■ The tecnical details given above just for infarmation.HAMMER WlNCH keeps the to change the tecnical. details ■ Pneumatic Working Pressure: Min - Max 9 - 12 bar (130 - 174 psi)

Open the catalog to page 1

5.6 PHT

5.6 PHT

Catalog excerpts

All Hammer Winch catalogs and technical brochures