*mydirectindustry

4.3 PHT

Product catalog summary

Specifications:
- Maximum pulling capacity: 4300 kg (9477 lbs)
- Maximum rope length: 65 m (215 ft)
- Recommended wire rope diameter: 10 mm (3/8 in)
- Maximum working pressure: 130 bar (1885 psi)
- Maximum pump flow: 60 lt/min (15.8 gal/min)
- Gear ratio: 5.6:1
- Oil type and capacity: 85W 90 - 0.75 lt
- Hydromotor capacity: 315 cc (19 in³)

Standards and Features:
- Includes cable tensioner and roller fairlead
- Hydraulic inlets: G 1/2’’
- Optional air clutch with IP67 - IP68 protection
- Mounting bolts: 8 pieces M12 8.8
- Weight: 44 kg (96.8 lbs)
- Reinforced aluminum cast body with heat treatment
- 100% holding negative-acting hydraulic brake system
- Easy assembly with high rope capacity and high torque hydromotor
- Standard manual rope unloading system

Warnings:
- Ensure A-B lines are open to T line (tank line) of the control valve in center position before operation
- Designed for pulling only, not for lifting people or materials
- Always keep the last 5 wraps on the drum
- Technical details are subject to change by HAMMER WINCH

Pneumatic Working Pressure:
- Minimum: 9 bar (130 psi)
- Maximum: 12 bar (174 psi)

Performance Data:
- Pulling capacity varies with rope winding layers, from 4300 kg (9477 lbs) on the first layer to 2610 kg (5754 lbs) on the fifth layer
- Rope speed ranges from 11 m/min (36 ft/min) to 20 m/min (66 ft/min) depending on the layer

Catalog excerpts

HAMMERgpfgfl HMW Extra reinforced aluminium cast body through the heat treatment and industrial design • Light and powerful design • %100 Holding Negative-Acting Hydraulic brake system. • Standard Pressure Roller and Roller Failead. • Easy assembly, High rope capacity and High torque hydromotor • Standard manual rope unloading system Max.pulling capacity (kg / Ibs) Max.rope length (mt / ft) Recommended wire rope (mm / in) Hydromotor (cc / in3) : Max. pump flow (l / min - gal / min) Gear ratio: Oil types and capactiy Max. working pressure (bar / psi) Specifications Winch : (kg / Ibs ) 44 kg (96.8 Ibs) Roller Fairlead : ( kg / lbs ) 6 kg (13,22 Ibs) Cable Tensioner 2,5 kg (5,51 Ibs) Mounting Bolts 8 pieces M12 8,8 HMW 4.3 PHT/P Air Clutch HMW 4.3 PHT Manual Clutch Standards Cable tensioner Roller Fairlead Optinal Air Clutch IP67 - IP 68 Hydraulic Inlets G 1/2’’ Warning!! ■ Before operate the winch, A-B lines must be open to Tline (tank line) of the control valve in center position. ■ This winch is desingd and manufactured for pulling, don't lift person or metarial. ■ Always keep last 5 wrap on the drum. ■ The tecnical details given above just for infarmation. ■ HAMMER WiNCH keeps the to change the tecnical. details ■ Pneumatic Working Pressure: Min - Max 9 - 12 bar (130 -174 psi)

Open the catalog to page 1

4.3 PHT

4.3 PHT

Catalog excerpts

All Hammer Winch catalogs and technical brochures