4.0 PHT/CE - ST

1 / 1 PageView full catalog

4.0 PHT/CE - ST

Product catalog summary

Specifications:

Max pulling capacity: 4000 kg (8823 lbs)
Max rope length: 65 m (210 ft)
Recommended wire rope: 10 mm (3/8”)
Hydromotor capacity: 250 cc (15 in³)
Max pump flow: 60 lt/min (15.8 gal/min)
Gear ratio: 5.6:1
Oil type and capacity: 85W 90 - 0.75 lt
Winch weight: 58.5 kg (128.7 lbs)

Standards and Features:

Cable tensioner and roller fairlead included
Hydraulic inlets: G 1/2’’
Optional air clutch with IP67 - IP68 rating
Max working pressure: 150 bar (2175 psi)

Additional Components:

Roller fairlead weight: 6 kg (13.22 lbs)
Cable tensioner weight: 2.5 kg (5.51 lbs)
Mounting bolts: 8 pieces M14 8.8

Performance:

Rope winding layers affect pulling capacity and speed
Pulling capacity ranges from 4000 kg (8823 lbs) to 2430 kg (5356 lbs) depending on rope layer
Rope speed ranges from 14 m/min (46 ft/min) to 23 m/min (76 ft/min)

Design and Safety:

Extra reinforced cast body with heat treatment
100% holding negative-acting hydraulic brake system
Standard manual rope unloading system
Warning: Do not use for lifting people or materials
Ensure last 5 wraps remain on the drum

Operational Notes:

Before operation, ensure A-B lines are open to T line of the control valve in center position
Pneumatic working pressure: Min - Max 9 – 12 bar (130 - 174 psi)

Catalog excerpts

■IAMMER nZBBT Extra reinforced cast body through the heat treatment and industrial design O Light and powerful design O %100 Holding Negative-Acting Hydraulic brake system. O Standard Pressure Roller and Roller Failead. O Easy assembly, High rope capacity and High torque hydromotor O Standard manual rope unloading system Standards Cable tensioner Roller Fairlead Optinal Air Clutch IP67 - IP 68 Hydraulic Inlets G 1/2’’ Specifications hmw4.0 pht/p Air clutchHMW4.0 PHTManual Clutch Max.pulling capacity (kg / Ibs) Max.rope length (mt / ft) Recommended wire rope (mm / in) Hydromotor (cc / in3) : Max. pump flow (l / min - gal / min) Gear ratio: Oil types and capactiy Max. working pressure (bar / psi) Winch : (kg / Ibs ) 58,5 kg (128,7 Roller Fairlead : ( kg / lbs ) 6 kg (13,22 Ibs) Cable Tensioner 2,5 kg (5,51 Ibs) Mounting Bolts 8 Adet M14 8,8 Warning!! ■ Before operate the winch, A-B lines must be open to Tline (tank line) of the control valve in center position. ■ This winch is desingd and manufactured for pulling, don't lift person or metarial. ■ Always keep last 5 wrap on the drum. ■ The tecnical details given above just for infarmation. ■ HAMMER WiNCH keeps the to change the tecnical. details ■ Pneumatic Working Pressure: Min - Max 9 - 12 bar (130 -174 psi)

Open the catalog to page 1

4.0 PHT/CE - ST

4.0 PHT/CE - ST

Catalog excerpts

All Hammer Winch catalogs and technical brochures