HAMMERQHfflFl HMW Extra reinforced aluminium cast body through the heat treatment and industrial design • Light and powerful design • %100 Holding Negative-Acting Hydraulic brake system. • Standard Pressure Roller and Roller Failead. • Easy assembly, High rope capacity and High torque hydromotor • Standard manual rope unloading system Specifications Max.pulling capacity (kg / Ibs) Max.rope length (mt / ft) Recommended wire rope (mm / in) Hydromotor (cc / in3) : Max. pump flow (l / min - gal / min) Gear ratio: Oil types and capactiy Max. working pressure (bar / psi) Winch : (kg / Ibs ) 43,5 kg (95.7 Ibs) Roller Fairlead : ( kg / lbs ) 6 kg (13,22 lbs) Cable Tensioner 2,5 kg (5,51 lbs) Mounting Bolts 8 pieces M14 8,8 Standards Cable tensioner Roller Fairlead Optinal Air Clutch IP67 - IP 68 Hydraulic Inlets G 1/2’’ Warning!! Before operate the winch, A-B lines must be open to T line (tank line) of the control valve in center position. This winch is desingd and manufactured for pulling, don't lift person or metarial. Always keep last 5 wrap on the drum. The tecnical details given above just for infarmation. HAMMER WlNCH keeps the to change the tecnical. details Pneumatic Working Pressure: Min - Max 9 - 12 bar (130 - 174 psi)