HMW 12.0 PHT/CE - K Extra reinforced cast body through the heat treatment and industrial design • Light and powerful design • %100 Holding Negative-Acting Hydraulic brake system. • Standard Pressure Roller and Roller Failead. • Easy assembly, compact design and high torque hydromotor • Standard manual rope unloading system Rope Winding Layer Specifications Max.pulling capacity (kg / Max.rope length (mt / ft) Recommended wire rope (mm / in) Hidromotor (cc / in3 ) Max. pump flow (l / min - gal / min) Gear ratio: Oil types and capactiy Max. working pressure (bar / psi) Winch : (kg / Ibs ) 161 kg 354,2 lbs Roller Fairlead : ( kg / lbs ) 16 kg 35,2 lbs Cable Tensioner 7 kg 15,4 lbs Hydraulic Inlets G 1/2’’ Mounting Bolts 16 pieces M16 8,8 Standards Cable tensioner Roller Fairlead Warning!! a Before operate the winch, A-B lines must be open to T line (tank line) of the control valve in center position. a This winch is desingd and manufactured for pulling, don't lift person or metarial. a Always keep last5 wrap on the drum. • The tecnical details given above just for infarmation. HAMMER WINCH keeps the to change the tecnical. details a Pneumatic Working Pressure: Min - Max 9 - 12 bar (130 -174 psi)