*mydirectindustry

10.0 SDW

1 / 1 PageView full catalog

10.0 SDW

Product catalog summary

Specifications:

Max Pulling Capacity: 10,000 kg (22,000 lbs)
Max Rope Length: 62 m (204 ft)
Recommended Wire Rope: 16 mm (5/8") with 1960 Mpa
Hidromotor: 160 CC (9.6 in³)
Max Pump Flow: 60 lt/min (15.8 gal/min)
Gear Ratio: 34.56
Oil Type and Capacity: 85W 140 - 0.9 lt
Winch Weight: 195 kg (429 lbs)

Standards:

Cable Tensioner
Air Clutch
Hydraulic Inlets: G 1/2’’
Max Working Pressure: 190 bar (2755 psi)
Mounting Bolts: 36 Adet M14 8.8

Performance:

Rope Winding Layers and Corresponding Pulling Capacities and Speeds:
- Layer 1: 10,000 kg (22,000 lbs), 9 m/min (30 ft/min)
- Layer 2: 8,995 kg (19,826 lbs), 10 m/min (33 ft/min)
- Layer 3: 8,173 kg (18,014 lbs), 11 m/min (37 ft/min)
- Layer 4: 7,488 kg (16,505 lbs), 12 m/min (40 ft/min)
- Layer 5: 6,909 kg (15,229 lbs), 13 m/min (43 ft/min)

Procedures and Recommendations:

Before operating the winch, ensure A-B lines are open to the T line (tank line) of the control valve in the center position.
This winch is designed for pulling only; do not lift people or materials.
Always keep the last 5 wraps on the drum.
Technical details are subject to change by HAMMER WINCH.
Pneumatic Working Pressure: Min - Max 9 – 12 bar

Design Features:

Extra reinforced cast body through heat treatment and industrial design
High torque hydromotor
Easy assembly
High rope capacity
100% Holding Negative-Acting Hydraulic brake system
Two different assembly options: chassis or side chassis

Catalog excerpts

m Extra reinforced cast body through the heat treatment and industrial design ■ High torque hydromotor ■ Easy assembly ■ High rope capacity ■ %100 Holding Negative-Acting Hydraulic brake system. ■ 2 different assembly,chassis or side chassis Max.pulling capacity (kg / lbs) Max.rope length (mt / ft) Recommended wire rope (mm / in) Hidromotor (cc / in3 ) Max. pump flow (l / min - gal / min) Gear ratio: Oil types and capactiy Max. working pressure (bar / psi) Rope Winding Layer Specifications : 10000 kg (22000 Ibs) Ibs) : 62 m (204 ft) : 16 mm ( 5/8" ) 1960 Mpa : 160 CC (9.6 in3) : 60 lt (15.8 gal) : 34,56 : 85W 140 - 0,9 lt. : 190 bar (2755 psi) Winch : (kg / Ibs ) 195 kg 429 lbs Standards Cable Tensioner Air Clutch Mounting Bolts 36 Adet M14 8,8 Hydraulic Inlets G 1/2'' Before operate the winch, A-B lines must be open to T line (tank line) of the control valve in center position. This winch is desingd and manufactured for pulling, don't lift person or metarial. Always keep last 5 wrap on the drum. The tecnical details given above just for infarmation. HAMMER WiNCH keeps the to change the tecnical details Pneumatic Working Pressure: Min - Max 9 - 12 bar

Open the catalog to page 1

10.0 SDW

10.0 SDW

Catalog excerpts

All Hammer Winch catalogs and technical brochures