HAMMEL VB 850 DK DIRECT drive

Product catalog summary

Overview: The document provides technical specifications and features of the HAMMEL Recyclingtechnik GmbH's primary shredder, Type VB 850 DK, which is part of their new generation of shredders with a DIRECT drive system.

Applications: The shredder is suitable for processing green waste, waste wood, mixed wood, and root stems.

Technical Specifications:

Drive: CAT C13 diesel engine with 480 horsepower.
Engine Speed: Maximum of 1,900 rpm.
Sound Pressure Level: 82 dB(A), measured at a distance of 1 meter.
Discharge Height: Maximum of 5,000 mm at a 35° angle.
Weight: 35 tons, excluding additional equipment.

Functional Principle:

The shredder uses a direct drive system with belt transmission and a reversing transmission.
It features special intertwining shafts that draw in and shred material directly.
Shaft Speed: 25 rpm.
Magnetic separation is achieved using an over belt magnet.

Advantages:

Increased efficiency through manual transmission.
Easy handling via mobile PLC (Programmable Logic Controller).
High energy efficiency with a 35% reduction in energy consumption compared to conventional drives.
Low wear and tear.
Low noise emission.

Additional Notes: The technical data provided are maximum values and may vary depending on configuration, operating conditions, and other external factors.

Catalog excerpts

CT RE rive d DI Vorbrecher / Primary shredder Type VB 850 DK DIRECT drive HAMMEL zentral in Europa HAMMEL central in Europe Berlin Frankfurt HAMMEL München Die neue Generation mit The new generation with Phone: Fax: Internet: E-mail: 1204-0602/dt./engl./Hammel/H00 HAMMEL Recyclingtechnik GmbH Leimbacher Straße 103 D-36433 Bad Salzungen +49 (0) 36 95 / 69 91 - 0 +49 (0) 36 95 / 69 91 - 93 www.hammel.de [email protected] Alle Angaben ohne Gewähr. No responsibility is taken for the correctness of this information. DIRECT drive

Open the catalog to page 1

VB 850 DK Arbeitsstellung working position Einsatzgebiete: • • • • application: Grünschnitt Altholz Mischholz Wurzelstöcke • • • • Technische Daten*: • • • • • Antrieb: Motordrehzahl: Schalldruckpegel: Abwurfhöhe: Gewicht: VB 850 DK technical data*: CAT C13 Dieselmotor, 480 PS max. 1.900 U/min 82 dB(A)** max. 5.000 mm bei 35° 35 t plus Optionen • • • • • Funktionsprinzip: • Direktantrieb mittels Riementrieb und Wendegetriebe • Speziell ineinandergreifende Werkzeugwellen • Werkzeugwellen ziehen das Material direkt ein und zerkleinern es • Wellendrehzahl: 25 U/min • Magnetabscheidung mittels Überbandmagnet...

Open the catalog to page 2

HAMMEL VB 850 DK DIRECT drive

HAMMEL VB 850 DK DIRECT drive

Catalog excerpts

All HAMMEL Recyclingtechnik GmbH catalogs and technical brochures

Archived catalogs