*mydirectindustry

Polilyte PRO VP 120

Product catalog summary

Product Overview: The Polilyte PRO VP 120 is a sensor designed for hazardous areas, resistant to HF glass, and equipped with a polymer electrolyte and single pore junction. It is ideal for wastewater and general industrial applications.

Product Specifications:

Sensor Family: Polilyte Pro
Sensor Output: Traditional mV
Length: 120 mm
Electrical Connector: VP6
Measurement Principle: Combination electrode; pH potential measured against reference
Measuring Range: pH 0 to 14
Sensitivity: 57 to 59 mV/pH at 25°C
Zero Point: 0 ± 20 mV
pH Glass Type: Hamilton Type HF Glass
pH Glass Resistance: Low
Membrane Shape: Spherical
Diaphragm: Single Pore
Number of Diaphragms: 1
Electrolyte: Polisolve
Reference System: Hamilton Everef-B
Temperature Sensor: Pt1000
Diameter: 12 mm
Process Connection: PG13,5
Wetted Parts: Glass, EPDM
O-ring Material: FDA 21 CFR 177.2600; EG 1935/2004; USP <87>; USP <88> Class VI (121°C)
Serial Number: Yes
Recommended Storage: Hamilton Storage Solution or 3 M KCl
Certificate: Yes, with measured values in Buffer pH 4.01 and pH 7.00

Approvals:

ATEX Approval: II 1/2 G Ex ia IIC T4/T5/T6 Ga/Gb; II 1/2 D ia IIIC T x °C Da/Db
IECEx Approval: II 1/2 G Ex ia IIC T4/T5/T6 Ga/Gb; II 1/2 D ia IIIC T x °C Da/Db

Limitations:

Autoclavable: No
CIP: No
Steam Sterilizable: No

Operating Conditions:

Temperature Range: -10 to 60°C
Sample Minimum Conductivity: 2 µS/cm
Pressure Range: 0 to 6 bar

Note: Specifications are subject to change without notice.

Catalog excerpts

Polilyte PRO VP 120 Specification Sheet (Part/REF # 238417) Hazardous area approvals, HF resistant glass (pH), polymer electrolyte, and single pore junction these sensors are well suited for waste water and general industrial applications. Product Specifications Sensor Family Sensor Output Electrical Connector Measurement Principle Combination electrode; pH potential measured against reference Measuring Range Zero Point Hamilton Type HF Glass Membrane Shape Single Pore Reference System Hamilton Everef-B Liquid Earth Temperature Sensor Process Connection Wetted Parts Glass EPDM (Ethylene propylene elastomer) O-ring Material Serial Number Recommended Storage Hamilton Storage Solution or 3 M KCl Yes, with measured values in Buffer pH 4.01 and pH 7.00 ATEX Approval II 1/2 G Ex ia IIC T4/T5/T6 Ga/Gb; II 1/2 D ia IIIC T x °C Da/Db IECEx Approval II 1/2 G Ex ia IIC T4/T5/T6 Ga/Gb; II 1/2 D ia IIIC T x °C Da/Db Steam Sterilizable

Open the catalog to page 1

Operating Temperature Range Specifications are subject to change without notice https://www.hamiltoncompany.com/sensors/238417

Open the catalog to page 2

All Hamilton Process Analytics catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list