*mydirectindustry

Catalogs
Hamilton Process Analytics
Polilyte Plus H Arc 120

Polilyte Plus H Arc 120

Product catalog summary

Product Overview: The Polilyte Plus H Arc 120 is an intelligent pH sensor designed for challenging industrial processes. It features Arc intelligent sensor technology for enhanced performance.

Specifications:

Sensor Family: Polilyte Plus
Parameter: pH
Sensor Output: Arc: Modbus, 4 to 20 mA
Length: 120 mm
Electrical Connector: VP8
Measurement Principle: Combination electrode; pH potential measured against reference
Measuring Range: pH 0 to 14
Sensitivity: 57 to 59 mV/pH at 25 °C
Zero Point: 0 ± 20 mV
pH Glass: Hamilton Type H Glass
pH Glass Resistance: Moderate
Membrane Shape: Spherical
Diaphragm: Single Pore, 2 diaphragms
Electrolyte: Polisolve Plus
Reference System: Hamilton Everef-L
Temperature Sensor: NTC 22 kOhm
Configurable Values: pH: pH, mV; Temperature: °C, K, °F
Diameter: 12 mm
Process Connection: PG13,5
Wetted Parts: Glass, FKM (Fluorocarbon Elastomer)
Analog Interface 1: 4 to 20 mA for pH, programmable
Analog Interface 2: 4 to 20 mA for Temperature, programmable
Digital Interface: RS485 Modbus (max. 31 addresses)
Baud Rate: 4800 to 115200 Bd
Operating Voltage: 7 to 30 VDC, max. 150 mW
Serial Number: Yes

Storage and Certification:

Recommended Storage: Hamilton Storage Solution or 3 M KCl
Certificate: Yes, with measured values in Buffer pH 4.01 and pH 7.00

Approvals and Sterilization:

ATEX Approval: No
IECEx Approval: No
Autoclavable: Yes, max. Temperature 130 °C
CIP: No
Steam Sterilizable: Yes, max. Temperature 130 °C

Operating Conditions:

Operating Temperature Range: Analog interface: 0 to 110 °C; Digital interface: 0 to 130 °C
Sample min Conductivity: 2 µS/cm
Pressure Range: 0 to 16 bar (100 °C), 0 to 10 bar (130 °C)

Catalog excerpts

Polilyte Plus H Arc 120 Specification Sheet (Part/REF # 242428-1313) Looking for an intelligent pH sensor that can survive in difficult industrial processes? The Polilyte Plus with Arc intelligent sensor technology can make it. Product Specifications Sensor Family Polilyte Plus Sensor Output Electrical Connector Measurement Principle Combination electrode; pH potential measured against reference Measuring Range Zero Point Hamilton Type H Glass Membrane Shape Single Pore Polisolve Plus Reference System Hamilton Everef-L Liquid Earth Temperature Sensor Configurable Values Process Connection Wetted Parts Glass FKM (Fluorocarbon Elastomer) Galvanically not isolated; pulse width modulation 3.5 kHz Digital Interface Baud Rate Operating Voltage Serial Number

Open the catalog to page 1

Recommended Storage Hamilton Storage Solution or 3 M KCl Yes, with measured values in Buffer pH 4.01 and pH 7.00 ATEX Approval IECEx Approval Steam Sterilizable Operating Temperature Range Analog interface: 0 to 110 °C; Digital interface: 0 to 130 °C Specifications are subject to change without notice https://www.hamiltoncompany.com/sensors/242428-1313 Spec. Versi

Open the catalog to page 2

Polilyte Plus H Arc 120

Polilyte Plus H Arc 120

Catalog excerpts

All Hamilton Process Analytics catalogs and technical brochures