*mydirectindustry

OxyGold B 120

Product catalog summary

Product Overview: The OxyGold B is a traditional polarographic dissolved oxygen (DO) sensor designed for applications involving carbon dioxide and other acidic gases. It provides a standard nanoampere (nA) output.

Specifications:

Sensor Family: OxyGold B
Parameter: DO (Electrochemical)
Output: Traditional nA
Length: 120 mm
Electrical Connector: VP6
Measurement Principle: Electrochemical reduction of oxygen
Measuring Range: 8 ppb to 40 ppm (DO) or 0.2 to 1000 mbar (pO₂)
Drift at Room Temperature: < 1% per week
Membrane Cap: Optiflow
Electrolyte: Oxylyte B
Oxygen Consumption: Approximately 100 ng/h in air at 25°C
Temperature Sensor: NTC 22 kOhm
Current in Air at 25°C: 180 to 500 nA
Diameter: 12 mm
Process Connection: PG13,5
Wetted Parts: Stainless Steel 1.4435, EPDM, Silicone (FDA 21 CFR 177.2600), VMQ
Surface Quality of Steel: Ra < 0.4 µm (N5)
Electrode System: Silver platinum combination
Polarization Voltage and Time: 0 ± 50 mV, ≥ 24 hours
Serial Number: Yes
Response Time t90%: < 60 s at 25°C
Certificate: Material and Performance Test Certificate
ATEX Approval: II 1/2 G Ex ia IIC T4/T5/T6 Ga/Gb; II 1/2 D ia IIIC T x °C Da/Db
IECEx Approval: II 1/2 G Ex ia IIC T4/T5/T6 Ga/Gb; II 1/2 D ia IIIC T x °C Da/Db
Autoclavable: No
CIP: Yes
Steam Sterilizable: No
Operating Temperature Range: 0 to 100°C
Pressure Range: 0 to 12 bar
Max. CO₂ Partial Pressure: 12 bar
Required Flow: ≥ 0.1 m/s

Notes: Specifications are subject to change without notice. For more details, visit the Hamilton Company website.

Catalog excerpts

OxyGold B 120 Specification Sheet (Part/REF # 237180) OxyGold B traditional polarographic DO sensors offer industry standard nA output for applications with carbon dioxide and other entrained acidic gases. Product Specifications Sensor Family Sensor Output Electrical Connector Measurement Principle Electrochemical reduction of oxygen Measuring Range Drift at Room Temperature Oxygen Consumption Temperature Sensor Process Connection Wetted Parts Stainless Steel 1.4435 EPDM (Ethylene propylene elastomer) Silicone - FDA 21 CFR 177.2600 VMQ (Silicone elastomer) See compliance details in Material Specification document Surface Quality of Steel Electrode system Silver platinum combination Polarization Voltage and Time Serial Number Material and Performance Test Certificate ATEX Approval II 1/2 G Ex ia IIC T4/T5/T6 Ga/Gb; II 1/2 D ia IIIC T x °C Da/Db IECEx Approval II 1/2 G Ex ia IIC T4/T5/T6 Ga/Gb; II 1/2 D ia IIIC T x °C Da/Db Steam Steriliz

Open the catalog to page 1

Operating Temperature Range Required Flow Specifications are subject to change without notice https://www.hamiltoncompany.com/sensors/237180 Spec. Version

Open the catalog to page 2

All Hamilton Process Analytics catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list