Dencytee RS485 120 Specification Sheet (Part/REF # 10064919-11) Total cell density (TCD) measurement by the Dencytee sensor is based on the optical density, or the turbidity of a suspension at NIR wavelengths. The Dencytee sensor has a wide measuring range of TCD. Product Specifications Sensor Family Total Cell Density Electrical Connector Sensor Output Measurement Principle Transmission and Reflection (including temperature compensation, daylight filter and subtraction) Measuring Range e.g. 0-200g/l cell dry weight yeast 0-4 AU 0-30'000 NTU Resolution: 0.05 g/l (0-10 g/l); 0.5 % (> 10 g/l) cell dry weight yeast Reproducibility: ± 1 % Linearity: < ± 1% of respective measuring range (specific to application with off-line correlation) Temperature Sensor Configurable Values TCD: PCV, AU, arb. Unit, NTU, g/l, CFU, e6 cells/ml, OD Temperature: K, °C, °F Process Connection Wetted Parts Stainless Steel 1.4435 Sapphire glass EPDM (Ethylene propylene elastomer) See compliance details in Material Specification document Surface Quality of Steel Digital Interface Baud Rate Operating Voltage Optical Path Length Serial Number ATEX Approval IECEx Approval

Steam Sterilizable Storage Conditions Operating Temperature Range 0 to 140 °C; the sensor provides no TCD reading above 80 °C. Protection Rating Specifications are subject to change without notice https://www.hamiltoncompany.com/sensors/10064919-11 Spec. Version