CO₂NTROL RS485 120 Specification Sheet (Part/REF # 10087810-11) Maintenance-free Solid-State Optical CO₂ Sensors Product Specifications Sensor Family Sensor Output Electrical Connector Measurement Principle Non-dispersive Infra-Red (NDIR) absorption of wavelength selective for CO₂; temperature compensation. Measuring Range 5 - 1000 mbar or 0.5 - 100 % vol or 7.5 - 1500 mg/L in liquid phase at 101.3 kPa and 25°C ±5 mbar (5-100 mbar); ±5% (> 100 mbar) Temperature Sensor Configurable Values CO₂: mbar, mmHg, hPa, %-vol, %-sat, µg/l ppb, mg/l ppm (dissolved CO ) Temperature: K, °C, °F Process Connection Wetted Parts Stainless Steel 1.4435 EPDM (Ethylene propylene elastomer) Silicone - FDA 21 CFR 177.2600 See compliance details in Material Specification document Surface Quality of Steel Digital Interface Baud Rate Operating Voltage Serial Number Yes, factory test with CO₂ certified gas Hygienic Design Approval EHEDG approved. EL Class I. (Test executed with Hamilton hygienic socket REF 242545) ATEX Approval IECEx Approval Steam Sterilizable Operating Temperature Range -10 to 140 °C; the sensor provides no CO₂ reading above 60 °C Pressure Range bar g

Required Flow Specifications are subject to change without notice https://www.hamiltoncompany.com/sensors/10087810-11