Bore9 Software
3Pages

Bore9 Software for Measuring and Aligning Up to 50 Bores Powerful new bore alignment software for most bore applications Hamar Laser's Bore9 software records alignment (concentricity) data for up to 50 bores. It also measures straightness of cylinders and can measure diameter changes when used with our self-centering targets in Measure Mode. It supports all of Hamar's past and present bore alignment equipment and features a step-by-step guide to help the user through the software. Applications include:        Engine Blocks Extruder Barrels Hydraulic Cylinders Large Bore Gun Barrels Printing Press Bearings Rotary Compressors Steam and Gas Turbines Program features include:  Built-in Step-by-Step Procedure Bore9 guides the user through the alignment with a 5-step process, starting with Step 1-- Bore Setup and ending with Step 5-- Results. Results can be plotted, saved and also exported into an Excel spreadsheet for further analysis. Straightness data from up to 50 bores can be recorded. Real-time Data Display The alignment displays the update in real time with each adjustment, allowing the user to quickly correct align the laser to end bores and correct misalignment errors. Measures Concentricity /Alignment, Straightness and Bore Size Bore alignment is accomplished by bucking in the laser (making it parallel) to the end bores, and then moving the target from bore to bore to measure deviations from the end bores. By using the NORMIN error correction procedure, both the alignment of the bores and the diameter changes are calculated automatically. All that is needed in an accurate diameter measurement of one of the reference bores. Target Mounting Error Correction Step 2--Target Mounting Error allows the user to follow our simple NORMIN procedure, removing centering errors in the target and bore adapters to give the ultimate in bore alignment accuracy. Comprehensive Plot Capabilities The data can be plotted in an X-Y or concentricity format. The datum reference can be changed from : 1) end bores, 2) selected bore numbers, 3) the laser beam or 4) a “Best Fit” line. The data for each point is recalculated automatically based upon which references are chosen. Other Plotting Features Additional features include the ability to zoom in and out of the graph area, to change direction when recording data, to select the target orientation when performing the NORMIN procedure and to automatically move from one point to be measured to the next. Report Generation Reports can be customized to the four different bore references, comments may be added, and the report can be printed with a summary, a graph of the concentricity, vertical and horizontal straightness, comments and a table showing the recorded data. 5 Ye Olde Road, Danbury, CT 06810 • Phone: (800) 826-6185 • Fax: (203) 730-4611 E-mail: sales@hamarlaser.com • Internet: http://www

Program Features Bore9 Alignment Software Step 1: Set up Bore9Step 1: Set up Bore9 The Bore9 Setup Screen prompts for the target(s) to use, the number of targets, even or uneven bore spacing, the number of points to be measured, the reference bore diameter, the laser position and tolerance bands (overall, bore-to-bore and reference target). Step 2: Target Mounting Error The Target Mounting Error Screen uses NORMIN procedure to determine mounting errors in the target and bore adapter and automatically adjusts the display to remove the error from the readings. The user will be required to...

Generating Reports Report Add company contact information and notes, select the type of graph you want and the plot bore reference and the report will be customized to the selections. The report can be printed to .PDF and emailed.