Catalogs >
HAMAMATSU >
TDI board level camera C10000-C01

TDI board level camera C10000-C01
1 / 2Pages

Catalog excerpts

TDI board level camera Single PC board module type camera High resolution / high sensitivity (Horizontal spatial resolution with 128(V) TDI stages) . 2048 (H) × 128 (V), 4 TAP The C10000-A01 is a TDI camera. TDI technology is useful for a wide range of imaging applications which requires high speed and high sensitivity simultaneously which a typical line scan camera can not make an useful image. TDI is a special image acquisition method that has been used extensively in machine vision applications for industrial inspection. TDI imaging is appropriate for applications where it is desired to record a linear process over time, or where the aspect ratio of the object being imaged is significantly asymmetric. The camera is particularly useful for low light level scanning applications. Frame readout mode is available for easy focusing. Line rate up to 50 kHz High speed imaging with high-sensitivity and low noise Great spectral response for UV to NIR with back thinned CCD Dynamic range of 1600:1 12 bit / 8 bit selectable A/D converter Bidirectional scanning operation Frame readout mode for easy focusing APPLICATIONS Fluorescent imaging In-line inspection with low light illumination Scanning for a large size sample (e.g. LED flat panel) TDI (Time Delay Integration): Time Delay Integration is a scanning technology in which a frame transfer device produces a continuous video image of a moving object by means of a stack of linear arrays aligned with and synchronized to the motion of the object to be imaged. In such a way that, as the image moves from one line to the next, the integrated charge moves along with it, providing higher resolution at lower light levels than is possible with a line-scan camera. Scanning orientation Camera Lens Signal intensity Object motion

Open the catalog to page 1

Back-thinned type 2048 (H) × 128 (V) 12 μm (H) × 12 μm (V) 24.58 mm (H) × 1.536 mm (V) F-mount Mini-Camera Link (SDR) × 1 TDI readout mode / Frame readout mode *1 Bidirectional transfer 4 TAP (512 × 128) Yes (100 times of the full well capacity) 30 MHz 0.45 kHz to 50 kHz Internal setting by serial command *2 / External trigger 80 000 electrons 50 electrons Quantum efficiency (%) Wavelength (nm) * This is typical, not guaranteed. * Without sapphire window. With the sapphire window, the spectral response is decreased due to the transmittance characteristics of the window. Camera Link base...

Open the catalog to page 2