Large area, high-speed Si PIN photodiodes The S3071, S3072, S3399 and S3883 are Si PIN photodiodes having a relatively large photosensitive area from ϕ1.5 to ϕ5.0 mm yet they offer excellent frequency response from 40 to 300 MHz. These photodiodes are suitable for FSO (free space optics) and high-speed pulsed light detection. FSO High-speed pulsed light detection Cutoff frequency S3071: 40 MHz (VR=24 V) S3072: 45 MHz (VR=24 V) S3399: 100 MHz (VR=10 V) S3883: 300 MHz (VR=20 V) High reliability: TO-5/8 metal package Structure / Absolute maximum ratings Effective Photosensitive photosensitive area size area (mm2) 19.6 7.0 7.0 1.7 Absolute maximum ratings Reverse voltage VR max. Operating temperature Topr Storage temperature Tstg Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to use the product within the absolute maximum ratings. *1: Window material K=borosilicate glass Electrical and optical characteristics (Typ. Ta=25 °C, unless otherwise noted) Photosensitivity S (A/W) Peak sensitivity wavelength λp Spectral response range λ Short circuit current Isc 100 lx (μA) 17 6.5 5.6 1.4

Spectral response Photosensitivity temperature characteristics (Typ. Ta=25 °C) Terminal capacitance vs. reverse voltage Terminal capacitance Dark current Dark current vs. reverse voltage

Dimensional outlines (unit: mm) (1) S3071 Photosensitive surface Photosensitive surface Distance from photosensitive area center to cap center -0.3≤X≤+0.3 -0.3≤Y≤+0.3 ɸ1.0 max. The glass window may extend a maximum of 0.15 mm above the upper surface of the cap. KPINA0024EC Distance from photosensitive area center to cap center -0.4≤X≤+0.4 -0.4≤Y≤+0.4 The glass window may extend a maximum of 0.2 mm above the up

Photosensitive surface Photosensitive surface ɸ1.5 max. Distance from photosensitive area center to cap center -0.3≤X≤+0.3 -0.3≤Y≤+0.3 Distance from photosensitive area center to cap center -0.3≤X≤+0.3 -0.3≤Y≤+0.3 Case The glass window may extend a maximum of 0.15 mm above the upper surface of the cap. Information described in this material is current as of November, 2014. Product specifications are subject to change without prior notice due to improvements or other reasons. This document has been carefully prepared and the information contained is believed to be accurate. In rare cases, however,...