Catalogs >
HAMAMATSU >
Si photodiode S1787 series

Si photodiode S1787 series
3Pages

Catalog excerpts

Plastic package photodiode with low dark current The S1787 series is a family of plastic package photodiodes that offer low dark current. Plastic package used is light-impervious, so no stray light can reach the active area from the side or backside. This allows reliable optical measurements in the visible to near infrared range, over a wide dynamic range from low light levels to high light levels. S1787-04: For visible range S1787-08: For visible to IR range S1787-12: For visible to near IR range Exposure meter Illuminometer Camera auto exposure Stroboscope light control Copier Display light control Optical switch, etc. Structure / Absolute maximum ratings Window material* Effective active area Active area size Absolute maximum ratings Reverse voltage Operating temperature Storage temperature VR max Topr Tstg (V) (°C) (°C) 10 * Window material R: resin coating, V: visual-compensation ﬁlter, I: infrared-cutting ﬁlter Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to use the product within the absolute maximum ratings. Electrical and optical characteristics (Typ. Ta=25 °C, unless otherwise noted) Peak Spectral response sensitivity range wavelength λp λ (nm) 320 to 730 320 to 1100 320 to 1000 Photosensitivity Terminal Shunt resistance Short Dark Temp. Rise time Rsh S capacitance Infrared circuit Temp. current coefficient tr VR=10 mV (A/W) Ct ID sensitivity current coefficient of ID VR=0 V GaP He-Ne Isc ratio of Isc VR=1 V TCID RL=1 kΩ VR=0 V Min. Typ. λp LED laser Max. f=10 kHz 100 lx (μs) 560 nm 633 nm (%) (GΩ) (GΩ) (pF) (μA) (%/°C) (pA) (times/°C) 0.3 0.3 0.19 10 0.65 -0.01 10 2.5 700 10 100 0.58 0.33 0.38 5.6 1.12 0.1 0.35 0.3 0.34 2.3 20 0.5 200 1 10

Open the catalog to page 1

Spectral response Rise time vs. load resistance (Typ. Ta=25 °C) Rise time Dark current vs. reverse voltage Shunt resistance temperature characteristics Shunt resistance Dark current

Open the catalog to page 2

Short circuit current linearity (Typ. Ta=25 °C, “A” light source fully illuminated) Photosensitive surface Dimensional outline (unit: mm) 7.8 - 0.1 Tolerance unless otherwise noted: ±0.15 KSPDA0056EB Incident light level (lx) KSPDB0128EB Related information www.hamamatsu.com/sp/ssd/doc_en.html Precautions ∙ Disclaimer ∙ Metal, ceramic, plastic package products Technical information ∙ Si photodiode/Application circuit examples Information described in this material is current as of October 2017. Product specifications are subject to change without prior notice due to improvements or other...

Open the catalog to page 3