Catalogs >
HAMAMATSU >
R12290U SERIES, R1328U SERIES

R12290U SERIES, R1328U SERIES
1 / 4Pages

Catalog excerpts

ULTRA-FAST PHOTODETECTOR BIPLANAR PHOTOTUBES R12290U SERIES, R1328U SERIES Biplanar phototubes are high-speed photodetectors capable of measuring waveforms of ultrashort optical pulses. Hamamatsu provides various types of biplanar photocathodes with different photocathodes to cover a wide range of applications spanning the vacuum UV to the infrared region. IR12290U series The R12290U series have a large sensitive area and fast time response, such as 270 ps rise time and 100 ps fall time. IR12290U-55 (For excimer laser measurements) The R12290U-55 was developed to directly measure high energy light such as from excimer lasers. Compared to conventional thermal conversion type detectors and semiconductor sensors the R12290U-55 offers fast time response and stable operation even when measuring high energy light. IR1328U series The R1328U series have very fast time response, such as 60 ps rise time and 90 ps fall time and excellent impedance matching. These characteristics make it possible to reproduce precise waveform of light pulses with extremely less ringing. GLaser pulse observation GTrigger for laser, Streak camera, etc. GTime calibration in subnanoseconds GTrigger for electronic shutter, etc. GFast time response GExcellent linearity with respect to high-power light GConforms to RoHS directive GEasy interface GExtremely low ringing GHigh immunity to magnetic fields Peak Spectral waveresponse length Photocathode material Anode Anode form supply voltage (V dc) Maximum ratings Characteristics (at 25 °C) A B C D E Input Peak Peak Average MeasureRise Fall light Luminouse cathode cathode energy cathode time time ring radiant sensitivity Typ. Typ. current density current voltage Typ. (A) (W/mm2) (µA) (V dc) (µA/lm) (mA/W) (ps) (ps) Ag-O-Cs Bialkali Multialkali Cs-Te Mesh Mesh Mesh Mesh Ag-O-Cs Bialkali Multialkali Cs-Te Mesh Mesh Mesh Mesh R12290U series (Large sensitive area, 270 ps rise time) R12290U-55 (For measurement of high-power pulsed light) R1328U series (60 ps rise time) NOTE: APulse width is less than 50 ns. BOutput current averaged over 1 second time interval. The whole photocathode is uniformly illuminated. CMeasured with a tungsten lamp operated at 2856 K and a 1 MΩ load resistor. The light input is 0.05 lm. DRise time refers to the time rising from 10 % to 90 % of the peak photocathode current when delta function light pulse enters the whole photocathode. EFall time refers to the time falling from 90 % to 10 % of the peak photocathode current when delta function light pulse enters the whole photocathode. Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein. ©2022 Hamamatsu Photonic

Open the catalog to page 1

ULTRA-FAST PHOTODETECTOR BIPLANAR PHOTOTUBES R12290U SERIES, R1328 SERIES Figure 1: Schematic diagram OUTPUT CONNECTOR ANODE CATHODE SPECTRAL RESPONSE CHARACTERISTICS Figure 3(a) shows typical spectral response characteristics of the R12290U and R1328U series. Figure 3(a): Typical spectral response characteristics of R12290U and R1328U RADIANT SENSITIVITY (mA/W) Biplanar phototubes consists of a circular, plane, lightsensitive surface called a photocathode and a mesh-type anode aligned in parallel to each other. Figure 1 shows the schematic construction of biplanar phototubes. The biplane...

Open the catalog to page 2

MAXIMUM EXCIMER LASER MEASUREMENT RANGE OF R12290U-55 The R12290U-55 is designed for use in the measurement of excimer lasers that have high-power light pulses. Combined with an attenuation filter (E3331: sold separately) it is particularly suited for measurements of excimer lasers being directly illuminated onto the photocathode at very high power levels. (See figure 4.) Maximum excimer laser measurement range Items Attenuation filter (sold separately) No attenuation filter Excimer laser (nm) ArF (193 nm) KrF (248 nm) XeCl (308 nm) ArF (193 nm) KrF (248 nm) XeCl (308 nm) Input light energy...

Open the catalog to page 3

ULTRA-FAST PHOTODETECTOR BIPLANAR PHOTOTUBES R12290U SERIES, R1328 SERIES IOPTIONAL ACCESSORIES Some optional devices, such as high voltage power supply, cable set and attenuation filter, need to be purchased for the use of phototubes. Hamamatsu has all those optional devices available to you. HIGH VOLTAGE POWER SUPPLY C15433 (Sold separately) Specifications Dimensional outline (Unit: mm) OUTPUT VOLTAGE SELECT VOLTAGE HIGH VOLTAGE POWER SUPPLY The model name and cable will change depending on the shipping destination. Japan: C15433-A1, North America: C15433-A2, EU: C15433-A3, China:...

Open the catalog to page 4