Catalogs >
HAMAMATSU >
Phototransistor S2829

Phototransistor S2829
4Pages

Catalog excerpts

Subminiature package phototransistor The S2829 is a high sensitivity phototransistor molded into a visible-cut plastic package. Subminiature plastic package with lens Rotary encoders Visible-cut package Touch screen Absolute maximum ratings (Ta=25 °C) Parameter Collector-emitter voltage Emitter-collector voltage Collector current Collector dissipation Operating temperature Storage temperature Soldering Symbol VCEO VECO Ic Pc Topr Tstg - Value 35 4 20 80 -25 to +85 -40 to +100 260 °C, 3 s, at least 2.5 mm away from package surface *1: When there is a temperature difference between a product and the surrounding area in high humidity environment, dew condensation may occur on the product surface. Dew condensation on the product may cause deterioration in characteristics and reliability. Note: Exceeding the absolute maximum ratings even momentarily may cause a drop in product quality. Always be sure to use the product within the absolute maximum ratings. Electrical and optical characteristics (Ta=25 °C) Parameter Photocurrent*2 Dark current Collector-emitter saturation voltage Peak sensitivity wavelength Rise time Fall time Symbol Ic ICEO VCE(sat) λp tr tf *2: Measured with a CIE standard “A” light source at 2856 K Response time measurement circuit IF Vcc

Open the catalog to page 1

Spectral response Collector power dissipation vs. ambient temperature (Typ. Ta=25 °C) Relative sensitivity (%) Collector power dissipation (mW) Photocurrent vs. ambient temperature Relative photocurrent (%)

Open the catalog to page 2

Dark current vs. ambient temperature Dark current Dimensional outline (unit: mm) 3.5 5° Visible-cut resin (black) 2.54 (Specified at the lead root) Emitter Collector Tolerance unless otherwise noted: ±0.2, ±2° Shaded area indicates burr. Values in parentheses are not guaranteed, but fo

Open the catalog to page 3

Related information www.hamamatsu.com/sp/ssd/doc_en.html Precautions · Disclaimer · Metal, ceramic, plastic products Information described in this material is current as of June, 2015. Product specifications are subject to change without prior notice due to improvements or other reasons. This document has been carefully prepared and the information contained is believed to be accurate. In rare cases, however, there may be inaccuracies such as text errors. Before using these products, always contact us for the delivery specification sheet to check the latest specifications. The product...

Open the catalog to page 4