Catalogs >
HAMAMATSU >
PHOTOSENSOR MODULE H13229 SERIES/H14211 SERIES

PHOTOSENSOR MODULE H13229 SERIES/H14211 SERIES
4Pages

Catalog excerpts

PHOTOSENSOR MODULE H13229 SERIES/H14211 SERIES - 1

PHOTOSENSOR MODULE H13229 SERIES / H14211 SERIES Operable under vacuum or decompression environment H13229 series and H14211 series are photosenser modules that comprise a metal package PMT and high voltage power supply circuit. These make stable operation possible under vacuum or decompression environment. These provide low power consumption and low gas release by our manufacturing method and construction. ▲Left: H13229, Right: H14211 Photocathode Super bialkali Ultra bialkali Multialkali Extended red multialkali Super bialkali Ultra bialkali Multialkali Extended red multialkali Multialkali Super bialkali Window material Borosilicate glass P type: for photon counting SPECIFICATIONS ●H13229 series Parameter Standard type Input voltage Max. input voltage Max. input current *1 Max. output signal current *2 Max. control voltage Recommended control voltage adjustment range Effective area Peak sensitivity wavelength Min. Luminous sensitivity Typ. Blue sensitivity index (CS 5-58) Typ. Red/White ratio Typ. Radiant sensitivity *4 Typ. Min. 2 Luminous sensitivity * Typ. Radiant sensitivity *2*4 Typ. Typ. Dark current *2*5 Max. Typ. P type dark count *2*5 Max. Rise time *2 Ripple noise *2*6 (peak to peak) Max. Settling time *7 Max. Operating ambient temperature *8 Storage temperature *8 Working pressure Weight At +5 V input voltage, +1.0 V control voltage, and output current equal to dark current. *2 Control voltage = +1.0 V These values are of a built-in PMT. There is a glass window which has 93 % transmittance in front of the PMT. Measured at the peak sensitivity wavelength. *5 After 30 minutes storage in darkness output of dark current. Cable RG174/U, cable length 450 mm, load resistance = 1 MΩ, load capacitance = 22 pF The time required for the output to reach a stable level following a change in the control voltage from +1.0 V to +0.5 V. Subject to local technical requirements and regulations, availability of products included in this promotional material may vary. Please consult with our sales office. Information furnished by HAMAMATSU is believed to be reliable. However, no responsibility is assumed for possible inaccuracies or omissions. Specifications are subject to change without notice. No patent rights are granted to any of the circuits described herein.

Open the catalog to page 1

PHOTOSENSOR MODULE H13229 SERIES/H14211 SERIES - 2

PHOTOSENSOR MODULE H13229 SERIES / H14211 SERIES SPECIFICATIONS ●H14211 series This product can change a built-in PMT upon request. Please consult with us. H14211-110 H14211-210 H14211-01 H14211-04 H14211-113 H14211-20 H14211P-110 H14211P-210 H14211P-01 H14211P-04 H14211P-113 Input voltage Max. input voltage Max. input current *1 Max. output signal current *2 Max. control voltage Recommended control voltage adjustment range Effective area Peak sensitivity wavelength Min. Luminous sensitivity Typ. Blue sensitivity index (CS 5-58) Typ. Red/White ratio Typ. Radiant sensitivity *3 Typ. Min....

Open the catalog to page 2

PHOTOSENSOR MODULE H13229 SERIES/H14211 SERIES - 3

Figure 3: Sensitivity adjustment method VOLTAGE PROGRAMMING POWER SUPPLY PHOTOSENSOR MODULE SIGNAL OUTPUT LOW VOLTAGE INPUT (RED) GND (BLACK) Vref OUTPUT (BLUE) Vcont INPUT (WHITE) • Adjust the control voltage to adjust the sensitivity. • Electrically insulate the reference voltage output. RESISTANCE PROGRAMMING POWER SUPPLY PHOTOSENSOR MODULE SIGNAL OUTPUT LOW VOLTAGE INPUT (RED) GND (BLACK) Vref OUTPUT (BLUE) Vcont INPUT (WHITE) * When using a potentiometer, adjust sensitivity while monitoring the control voltage so it does not exceed +1.1 V. ** When input voltage is +4 V or less, please...

Open the catalog to page 3

PHOTOSENSOR MODULE H13229 SERIES/H14211 SERIES - 4

PHOTOSENSOR MODULE H13229 SERIES / H14211 SERIES Figure 6: Dimensional outline (Unit: mm) ●H13229 series 102 21.5 GLASS CASE Guide mark FRONT VIEW SIDE VIEW Vcont INPUT (+0.5 V to +1.1 V) LOW VOLTAGE INPUT (+5 V) Vref OUTPUT (+1.2 V) SIGNAL GND SIGNAL OUTPUT GND NOT CONNECTED FRONT VIEW POWER INPUT CABLE, TFE Red: LOW VOLTAGE INPUT (+5 V) Black: GND White: Vcont INPUT (0.5 V to 1.1 V) Blue: Vref OUTPUT (+1.2 V) HAMAMATSU PHOTONICS K.K., Electron Tube Division 314-5, Shimokanzo, Iwata City, Shizuoka Pref., 438-0193, Japan, Telephone: (81)539/62-5248, Fax: (81)539/62-2205 U.S.A.: Hamamatsu...

Open the catalog to page 4